Solids Rotterdam 2015 - Ahoy Rotterdam, 30 September - 01 October 2015

Trade show for powder & bulk solids technologies

Innovations on tour

Participants of the ‘innovations on tour’ will be given a 10 minute presentation about their innovation on both days at their own booth. On this page you will find an overview of all the innovations and what time they are presented during the event. You can also contact them before the show to make an appointment at the show.

Programme Innovations on tour

Pitch time Innvovation Stand number
11.00 - 11.10 Vibratory Separator with an innovative solution to control product flow and oversize (only in Dutch) B119
11.15 - 11.25 De stofmeetkast van Optyl (only in Dutch) A109
11.30 - 11.40 Hardy HI6600 modular weighing system (only in Dutch) B103
11.45 - 11.55 MATCON “Cone Valve” container discharge technique C106
12.00 - 12.10 CLEACOM: the solution for the extraction and filtering of dust and vapour at compounding (only in Dutch) C111
12.15 - 12.25 CM710e online vochtmeetsysteem (only in Dutch) F109
12.30 - 12.40 Innovative MLA1000: continuous conductivity measurement for flowing light oils A122
13.15 - 13.25 Dry container cleaning system (only in Dutch) D116
13.30 - 13.40 Packing efficient in PE 100mu, dust proof valve bags, powderpack nonwoven (only in Dutch) E115
13.45 - 13.55 Twin needle sewing head and systems E114
14.00 - 14.10 Sintrol Dumo - De gecertificeerde procesmonitor voor het meten van stof in ruimten (only in Dutch) D119
14.15 - 14.25 Save money with dry, clean transport air (only in Dutch) C129
14.30 - 14.40 Chinseals DSIV-F
14.45 - 14.55 Moisture measurement: now also ready for coarse products (only in Dutch) B140
15.00 - 15.10 Ystral Pilotec(plant) (only in Dutch) D112
15.15 - 15.25 Dinnissen’s new hammer mill (only in Dutch) D111

Vibratory Separator with an innovative solution to control product flow and oversize

The Finex Separator™ is a grading sieve for wet or dry materials. When installed with up to four sieve decks this industrial screener can obtain up to five product fractions. Compared to traditional spring mounted grading sieves, the Finex Separator™ has a lower noise level and higher sieving accuracy and capacity. On the stand the Finex Separator™ will be fitted with the new Russell Gated Outlet™. This pneumatically controlled gate allows total control of your product flow and discharge. Installed in the outlet of the sieve deck, the Russell Gated Outlet™ can be inflated or deflated on demand. This upgrade is beneficial for applications where there is little oversize.

Exhibitor: Russel Finex N.V.
Stand: B119
Pitch time: 11.00 - 11.10 
Presentation at stand: NL

Finex Separator

De stofmeetkast van Optyl (only in Dutch)

Explosiegevaar? Veilig werken of niet ? Hoeveel ruimte heb ik nog tot de gevaarlijke zone? Dankzij de stofmeetkast van Optyl heb je 24/7 bescherming tegen stofexplosies. Er wordt continu lucht aangezogen die dan wordt geanalyseerd. Onmiddellijk een resultaat in mg/m³. Bij overschrijding van bepaalde grenswaarden onmiddellijke reactie, alarmeringen en visualisatie. Reeds verschillende installaties in de BeNeLux waaronder Fonterra in Heerenveen. Bespaar op restrictie maatregelen, investeer in online veiligheid.

Exhibitor: Optyl
Stand: A109
Pitch time: 11.15 - 11.25 
Presentation at stand: NL


Hardy HI6600 modular weighing system

Up to 30 weighing channels communicate through one gateway module via profibus or ethernet/IP at high speed. All typical hardy features, such as calibration without test weights and the integrated technician are available. 

More innovations

Exhibitor: B+L Industrial Measurements
Stand: B103
Pitch time: 11.30 - 11.40
Presentation at stand: NL


MATCON “cone valve” container discharge technique

Verbaten Stortgoedtechniek presents, as agent for the Netherlands, on stand C106 the unique IBC discharge dosingprinciple from the worldplayer Matcon, specialised in IBC blending and handling systems. Richard Meheran ( Business Development Manager) will present you the functional principle, with its specific advanges, of this “cone valve” technique by use of an operationally deployed unit. (see enclosed photo). This proven “cone valve”concept is the basis of the formulating, blending and bagging systems as Matcon uses in their system solutions. The latest development as part of the system innovation is the “blender intensifier” to be able to blend succesfully also not free flowing powders with a tumble mixer.

Exhibitor: Verbaten Stortgoedtechniek B.V
Stand: C106
Pitch time: 11.45 - 11.55 
Presentation at stand: EN

Verbaten Stortgoedtechniek

CLEACOM: the solution for the extraction and filtering of dust and vapour at compounding

Keller Lufttechnik developed the concept CLEACOM specially for the compounding and extrusion industry. Here, there are high demands on all the installations that are necessary for the production of plastic granules, in order to obtain a maximum availability. In addition to the process technology itself, the extraction of dust and vapours is an important aspect for both the health of employees and the environment. The Keller filter systems are energy efficient, easy to maintain and have the lowest emissions.

Exhibitor: Keller Lufttechnik Benelux
Stand: D108
Pitch time: 12.00 - 12.10
Presentation at stand: NL

Innovation - Keller
Innovation - Keller

CM710e online vochtmeetsysteem (only in Dutch)

Het CM710e NIR online vochtmeetsysteem van NDC Technologies is de laatste innovatie op het gebied van de online vochtmeting van bulkgoederen. Het is een stabiel en betrouwbaar meetsysteem met een hoge meetnauwkeurigheid en reproduceerbaarheid voor de online meting van het vochtgehalte in een breed scala aan applicaties in de bulkgoederen en chemische industrie. De voordelen van het CM710e NIR meetsysteem zijn o.a. toename van productiviteit en energiebesparing.

Exhibitor: Quality2Process B.V
Stand: F109
Pitch time: 12.15 - 12.25
Presentation at stand: NL

Quality 2 process

Innovative MLA1000: continuous conductivity measurement for flowing light oils

MBA Instruments GmbH, the level and conductivity measurement technology specialists based in Quickborn near Hamburg, has launched a new innovative product. Installed directly in pipelines, the new MLA1000 constantly measures inline the electric conductivity and the temperature of flowing light oils, for example Jet A-1 kerosene, and is consequently able to control continuously the dosing of additives. Metering: “As much as necessary and as little as possible.”.

Exhibitor: Kemp BV
Stand: A122
Pitch time: 12.30 - 12.40
Presentation at stand: EN

Dry container cleaning system

The innovative container/IBC cleaning system CSM 1500 of Jongerius is the perfect solution in order to comply with continuously increasing environmental requirements. The unique design can be quickly implemented and has a high Return on Investment. The system can be deployed anywhere because there are no liquids used. The residue that remains after the cleaning cycle is easy to collect and cheap to dispose of. After cleaning the container is immediately available for use in the production process. 

Exhibitor: Jongerius
Stand: D116
Pitch time: 13.15 - 13.25 
Presentation at stand: NL


Packing efficient in PE 100mu

Fardem Packaging produces heavy duty PE packaging for efficiently packaging of bulk goods. This producer of FFS (form-fill-seal) tube film and bags has over 130 years of experience! Fardem Packaging produces a variety of PE packaging for all kinds of applications. These packagings meet the highest requirements. This is resulting in stronger film which can be produced a lot thinner. Which has as a consequence a lower cost price!

The advantages of the ‘state of the art-films’ are: less use of raw materials (durability), reduction of packaging costs, less machine adjustments and more efficient production hours.

Besides tube film Fardem Packaging produces also open mouth bags, valve bags and block bottom bags. For all packaging we can applicate  inline printing of 6 colours up to 10 colours outline printing on both sides. For all product groups we can arrange a UN-inspection. Fardem Packaging: a perfect price/quality ratio.

More innovations

Exhibitor: Oerlemans Packaging B.V.
Stand: E115
Pitch time: 13.30 - 13.40
Presentation at stand: NL

Oerlemans Plastics

Twin needle Sewing Head and Systems

We would like to remind you the very interesting features offered by the Twin Needle Sewing Head and Sewing Systems that remain ideal to close open mouth bags including paper, woven polypropylene, and coated woven polypropylene. The Twin Needle Sewing Head closes a bag by sewing 2 parallel lines on it. The stitches between the two lines are offset to further minimize/eliminate sifting of product through the sewn closure. In case of rice or coffee, sifting is eliminated, while with sugar or flour some reduced sifting still remains possible due to the small size of the crystals or of the powder. This type of closure also reinforces the safety of the closure against theft and breakage. This “low vibration” Sewing Head is used for plain sewing, double stitch type 401, of open mouth bags. The Sewing Head requires to be mounted on an appropriate column or frame.

Exhibitor: Fischbein sa-nv
Stand: E114
Pitch time: 13.45 - 13.55
Presentation at stand: EN


Sintrol Dumo - De gecertificeerde procesmonitor voor het meten van stof in ruimten (only in dutch)

Door de steeds hogere eisen die gesteld worden aan de werkomgeving om de gezondheid van de medewerker niet in gevaar te brengen en het milieu te beschermen wordt het meten van stofaandeel in de lucht steeds belangrijker. De Sintrol Dumo is de ideale trendmonitor en de nieuwe DustLog 8 software is een revolutionair datalogsysteem met rapportage tool. Er kunnen rapporten worden weergegeven met gemiddelde metingen uit het verleden en met de mogelijkheid om deze maandelijks, wekelijks of dagelijks in een grafiek weer te geven. Na installatie kan bijna alles op afstand geregeld worden met behulp van de Dustlog8 software. Met de nieuwe IECEX/Atex gecertificeerde Dumo kan nu ook in ruimtes waar explosiegevaar heerst gemeten worden. 

Exhibitor: Solids Instruments
Stand: D119
Pitch time: 14.00 - 14.10 
Presentation at stand: NL

Solids instruments

Save money with dry, clean transport air

Compressed air is used to transport bulk material from transport tank to storage silo. This often has a humidity of 100% due to insufficient drying. The moisture in the air causes the powdered matter to congeal into a lumpy mass which blocks pipework. This warm, moist atmosphere provides ideal living conditions for bacteria growth and cleaning pipework is a very expensive and time-consuming task. The new low-pressure refrigeration dryer DRYPOINT® RA saves time and money by providing dry, clean air which offers an added bonus of improving product quality.

Stand: C129
Pitch time: 14.15 - 14.25
Presentation at stand: NL



CinchSeal's goal is to provide customers with a solution to leakage problems while, at the same time, eliminating any damage to the shaft or the seal. Furthermore, the solution should be durable and easy to install and maintain. This has resulted in a new design, where a blue rubber boot made from high-tech silicone is placed firmly around the shaft and turns with it. This rubber boot drives two white PTFE rotor cups with the same speed as the shaft and these rotor cups provide the sealing surface against the metal housing.

The patented Split Seal Design means that CinchSeals are made out of two parts, so that the seal can be easily and cost-efficiently installed and maintained without removing drive units or bearings. Because of its unique design, no shaft or seal damage occurs which guarantees highest product safety standards and has resulted in USDA and FDA certification, for use in the production of meat, poultry and baby foods as well as pharmaceuticals and chemicals.

Exhibitor: Cinchseal
Stand: DSIV-F
Pitch time: 14.30 - 14.40
Presentation at stand: EN


Moisture measurement: now also ready for coarse products

Are you spending a lot of time to determine the moisture content? Is determination of the moisture content of your product a challenge for conventional measuring systems? Or are you planning to do measurements on your product? Get introduced with the INADCO Moisturemeter II. One complete system for direct inline and online measurements on your product with results as for example real time moisture content, mass flow and volume flow. With this newly developed INADCO Moisturemeter II, we are among the top innovative companies in the Netherlands according to the MKB Innovation top 100 2015. Suitable for both food and non-food industries.

Exhibitor: INADCO Moisture Measurement B.V.
Stand: B140
Pitch time: 14.45 - 14.55
Presentation at stand: NL



Exhibitor: Ystral Benelux
Stand: D112
Pitch time: 15.00 - 15.10 uur
Presentation at stand: NL

Ystral innovation

Dinnissen’s new hammer mill

Dinnissen’s new hammer mill is extremely reliable and delivers 20% higher capacity in combination with improved product quality. Dinnissen Process Technology specializes in the development and production of process technologies for the feed, food, pharma and chemical industries. Dinnissen offers a wide range of crushers and mills for grinding, crushing and micronizing various ingredients. Recently Dinnissen introduced its newest Hamex hammer mill to the market, which is equipped with increased screen surface, extra large grinding panels, and an (semi)automatic screen changer. This innovative combination turns out to be extremely reliable with a minimal downtime and delivers 20% higher capacity in combination with significant better results: a very homogeneous product as well as reduced waste flows.

Exhibitor: Dinnissen
Pitch time:
15.15-15.25 uur
Presentation at stand: NL

Dinnissen Innovations on tour