Show Reviews

Record-Setting attendance at SOLIDS Dortmund 2015

SOLIDS Dortmund 2015 - This show was a great success

On 4th & 5th November 2015 in Dortmund 6,561 trade professionals – 37 percent more than last year – attended the double trade show Solids and Recycling-Technik, setting a new visitor record. The exhibition floor was equally busy on both show days. The visitors came in order to discuss specific projects, make new contacts and to do business with the 450 suppliers present. Read more...

With 23% increase in visitor numbers the community of Solids has grown again

3.000 visitors Solids Rotterdam 2015

Ahoy Rotterdam, 30 September & 1 October 2015: Solids, the only trade show for the entire bulk sector in the Netherlands, has 23% more visitor numbers due to an improved appearance and adjustments in the show concept. Ahoy Rotterdam was this year also the place to be where the loyal Solids community came together. Solids Rotterdam is the ideal platform for suppliers and buyers to create business opportunities and network with each other. Read more...

SOLIDS EUROPEAN SERIES IS EXPANDING TO RUSSIA

SOLIDS Russia 2015: successful introduction of international solids show into Russian market

27 & 28 May 2015 saw the debut of SOLIDS Russia in St Petersburg, the first exhibition and conference for powder & bulk solids technologies in Russia. The event was decidedly international: 40 exhibitors from 11 countries met with over 500 trade visitors from a total of 10 countries. Read more...

International - Professional visitors came from 10 countries, plus the whole Russia, to the new convention and exhibition Centre “EXPOFORUM”
Top-class - High-profile conference on transportation of solids, bulk and powder materials and 1st the Russian Fire and Explosion Protection Congress
Unique - The gala dinner at the historic place - the "Rose Pavilion" in the palace garden "Pavlovsk", offered a unique experience

Solids Russia 2015

SOLIDS Basel 2015 - a short review

SOLIDS Basel 2015: Top trade show for decision makers and industry experts

Exhibitors are very satisfied with the high-calibre technical discussions and intensive networking

With over 1,000 visitors to the fourth edition show, SOLIDS Basel 2015 reconfirmed its leading position in Switzerland as the event for granules, powders and bulk solids technologies. "The discussions onsite and the positive feedback from 83 exhibitors have been very gratifying," says Daniel Eisele, Event Director for the show organiser, Easyfairs. "The national flagship show on process engineering for solids and powders has again proven its intrinsic value here in Switzerland." Read more...

Solids Basel 2015

SOLIDS ANTWERP 2015 - A SHORT REVIEW

Visiting Eurochem during Solids was a great success!

On 11 and 12 March 2015, the Solids show took place in Antwerp co-located with M+R. M+R is the show for measurement and control instrumentation in the processing industry. 2.184 unique visitors visit Solids. An increase in visitor numbers of 26% compared to the previous edition. An important topic during the two show days was explosion protection. Also employees from Eurochem talked about their experiences with Atex and SIL. For the first time visitors could combine their visit to the show with a visit to EuroChem. They produce annually 2.3 million tons of fertilizers.

SOLIDS Dortmund 2014 - a short review

Visitor record at SOLIDS Dortmund & RECYCLING-TECHNIK 2014 – trade show registers around 5,000 attendees

The trade-show duo presented itself with a new brilliance this year. The development of the stand concepts was a complete success. The new All-in Plus stand increased the overall attractiveness of the show’s image. Many exhibitors brought machinery to their stands and presented their products and innovations live,” said Daniel Eisele, Event Director, easyFairs Deutschland GmbH.“ New show features such as the Business Bar in Hall 4, the VIP & Speakers Lounge, the four seminar forums with 60 technical presentations, the conference and the guided tours were moreover very well received and offered additional networking as well as superb education and training opportunities.

Full post-show report available for download.

For detailed information on SOLIDS Dortmund 2014 please visit the picture gallery and the website of SOLIDS Dortmund 2015 for the next edition.

SOLIDS Rotterdam 2013 - a short review

International focus and quality of Rotterdam show ensure confidence in the development of Solids European Series concept

Whoever took part at Solids Rotterdam (2 & 3 October) will have appreciated that the concept is growing and provides the entire solids industry with a new way of meeting and doing business. Ahoy Rotterdam once again provided the optimum location for this gathering and made the show, together with Pumps & Valves, perfect for two days of international networking and trading.

Solids Rotterdam stands for quality and trust, on both the demand and supply side. This was the   fifth anniversary of the show, a fact which did not go unnoticed among the faithful and loyal participants who visited Solids Rotterdam. Together with Pumps & Valves, nearly 250 participants welcomed almost 2500 visitors in total, of who 56% were visiting the show for the first time. Nearly 97% of the surveyed visitors stated that they were “satisfied” or “very satisfied” with their visit. And 89% will be back in 2015!

For detailed information on SOLIDS Rotterdam 2013 please visit the photo galery and the website of SOLIDS Rotterdam 2015

SOLIDS Kraków 2013 - a short review

SyMas (SOLIDS), Poland’s Trade Show for Powder & Bulk Solids Technologies  - 6th edition to take place in brand new venue: Expo Kraków

Preparations are already fully underway for the next edition of the only Polish trade show for the powder and bulk solids industry, SyMas 2014 (SOLIDS). The upcoming show will take place on 29-30 October 2014 in a stunning new venue, the ultra-modern, high-tech exhibition and convention centre, Expo Kraków. SyMas is one of the Solids European Series shows – Europe’s largest series of expert trade shows focused on powder and bulk solids technologies.

The previous edition of SyMas in Kraków drew nearly 120 exhibitors from Poland and abroad. Participation by firms from Denmark, Italy, Germany, France, Czech Republic, Belgium, Finland, United States, Netherlands, Sweden and Great Britain highlight the international scope of the event.

SyMas is designed for professionals from almost any sector – food & beverage, chemicals, building materials, agriculture or mining, and many others – who need to process, handle, and/or store bulk goods or powders. The essence of the show is not only the diversity of business challenges being solved but also the level of the visitors: experts who know exactly what they’re looking for and have clear objectives. Exhibitor testimonials demonstrate the high standard at the show:

“To our surprise the visitors were all professionals who knew what they needed: there were no ‘collectors’ or ‘onlookers’, just competent guests. I’m pleased with our participation in this show.”
M.Eng. Wojciech Halkiewicz, Firma Inżyniersko – Handlowa ARIA-C, Technika Sprężonego Powietrza.

 

“The show organisers deserve a word of appreciation for this splendidly prepared and conducted trade fair, which was preceded by an effective publicity campaign. Our customers’ interest in the show was quite high, and that’s invaluable for any business.”
Robert Ryt, Kaeser Kompressoren

As every year, SyMas 2014 will be co-located with Poland’s top show for industrial maintenance and asset management, MAINTENANCE 2014.

SyMas is not just an exhibition of the most advanced technologies, products and services; it also features a comprehensive programme of accompanying events. This field urgently depends on knowledge, so we are currently developing the new schedule of learnShops seminars, where top industry experts will share their expertise and experiences with the interested public. And the next edition of Modern Technologies in Bulk Solids Industry, a conference exclusively for solids professionals, will also take place during the show. More details will follow shortly on our website: www.easyfairs.com/pl/symas2014

 

SOLIDS Basel 2013 - a short review

SOLIDS Basel 2013 again met with great interest!

More visitors, satisfied exhibitors: On 14 November, SOLIDS Basel 2013, Switzerland’s third edition of the European trade show series for solids technology, SES, concluded on an upbeat. “SOLIDS Basel has become a vital meeting place for industry professionals and established itself as a unique, cross-border business platform for the solids market in the tri-national region,” says Event Director Daniel Eisele. In total, around 1,000 trade visitors came to learn about the newest developments, trends and innovative solutions in solids technologies for process industry. SOLIDS Basel 2013 also highlighted a critical topic in its exclusive lecture series on the role of explosion protection in solids technology and through its guided visitor tours of the exhibition.  

Event Director Daniel Eisele presents a thoroughly positive picture of the results: “This year’s trade show went really well: with approximately 1,000 visitors, we’ve definitely grown in comparison to previous editions of SOLIDS Basel. On both show days, we had a good, steady stream of attendees, and a lot of interest was shown at the 83 exhibitors’ stands. But what pleased me most was how happy the exhibitors were with the format: they reported making many high-value business contacts – which in some cases had already led to concrete orders.”

The positive feedback was also evident in pre-bookings for the next edition of SOLIDS Basel, which takes place in 2015. “We received 30 reservations and several committed bookings for 2015, all before the 2013 event had closed its doors: that’s a clear sign that the show’s on the right track,” remarks Eisele. He promises that the trade fair will be developed further to meet the future needs of the market: “We’re not planning to rest on our laurels!” Already in the works for SOLIDS Basel 2015 are attractive new forums and a high-impact professional conference featuring exclusive presentations; “even more content for an even more diverse, high-calibre offering to appeal to both existing and new target groups,” explains Eisele.

For information on the upcoming SOLIDS Basel 2015 please visit the website: SOLIDS Basel 2015