Innovation Gallery

JACOB Rohrsysteme - The modular pipeworksystem

JACOB Rohrsysteme - The modular pipeworksystem

Pipework systems are the lifeline of modern production systems. They transport raw materials and products, direct exhaust and extract dust. Their applications are as diverse as the spatial requirement...

SWR engineering - ProGap S - Limit level detection

SWR engineering - ProGap S - Limit level detection

Microwave barrier for the contactless detection of dry bulk solids in containers, piping or shafts • Absolute insensitive to material caking • Can be used up to a profile of 18 m (larger profiles...

SWR engineering - FlowJam Plus - Material flow monitor with blockage detector

SWR engineering - FlowJam Plus - Material flow monitor with blockage detector

Material flow monitor with blockage detector The FlowJam Plus is a logical development of the established FlowJam sensor which has proved its worth in thousands of applications: • rapid detection o...

SWR engineering - AirSafe - Continuous ambient air dust monitoring

SWR engineering - AirSafe - Continuous ambient air dust monitoring

Continuous dust monitoring in ambient air ● The creation of dust explosion zones can be prevented. ● Dust concentrations at work stations are safely monitored. ● Possible dust escape from syste...

SWR engineering - Sensor calibration ProSens

SWR engineering - Sensor calibration ProSens

Sensor calibration using the Dosed-Reference-Method "The measurement result of the sensor is only as good as the reference to which it has been calibrated." For this reason we have developed the dose...

SWR engineering - PicoFlow - Continuous flow measurement at low solid/air ratios

SWR engineering - PicoFlow - Continuous flow measurement at low solid/air ratios

Measuring powder flows in transport lines with very low material concentrations. ● In pneumatic applications for material flow rates of up to 100 kg/h (depending on application) ● In free-fall...

VIRTO GROUP - C-Line -VPF

VIRTO GROUP - C-Line -VPF

The VPF vibratory sieves are typically used for the separation of pharmaceutical materials. These top specified stainless steel mesh sieves obtain high grade polishing to an immaculate mirror finish. ...

IEP Technologies GmbH - Indoor Explosion Venting

IEP Technologies GmbH - Indoor Explosion Venting

By using BRILEX Explosion Vents in combination with a unique BRILEX Ceramic Filter, economical venting of dust explosions is possible. When the vent opens during an explosion, the ceramic filter retai...

IEP Technologies GmbH - Explosion relief valves type EVN 2.0

IEP Technologies GmbH - Explosion relief valves type EVN 2.0

Flameless Venting - Reliable Explosion Protection without Plant Downtime • Reliable flameless pressure relief • No direct shut-down of the system • Extremely short response time • Immediate ...

VIRTO GROUP - C-Line - VP1

VIRTO GROUP - C-Line - VP1

The VP1 is our brand-new C-Line vibrating sieve that achieves outstanding performance for high capacity check screening and easily fits into smaller spaces thanks to its compact size. Suitable for wet...

HÄNDLE GmbH Maschinen u. Anlagenbau - JCSS Pelletizing

Pelletizing of different finese (manganese fines, baghouse dust, coal fines,...)

J. ENGELSMANN - JEL Phoenix

J. ENGELSMANN - JEL Phoenix

With the JEL Phoenix, Engelsmann has developed a new long-stroke screening machine which provides more flexibility and efficiency for use in the chemical industry. The sieve combines a screening proce...

DYNA Instruments GmbH - Continuous flow rate measurement of bulk solids

DYNA Instruments GmbH - Continuous flow rate measurement of bulk solids

The DYNAmas flowmeter is used for continuous flow measurement of all kinds of bulk materials by applying the capacitive measuring principle. Accurate online flow measurement in free fall, as well as f...

DI MATTEO Group - ODM – DiscSCREEN SSM

DI MATTEO Group - ODM – DiscSCREEN SSM

The ODM-DiscSCREEN SSM is used for the separation of oversized, three-dimensional lumps from free-flowing bulk materials of different fractions – so protecting the downstream units in your plant aga...

DI MATTEO Group - ODM – Belt weigh feeder GraviSCALE DBW

DI MATTEO Group - ODM – Belt weigh feeder GraviSCALE DBW

Development of a continuous and reliable gravimetric dosing of bulk materials in every process in the “heavy industry” Many automated production processes require continuous weighing and dosing. ...

DI MATTEO Group - ODM – Silo

DI MATTEO Group - ODM – Silo

We are very flexible when it comes to building silos, and we offer a variety of structural forms – from round to rectangular to poly-sided. Everything is tailored to your materials and your needs. ...

DI MATTEO Group - ODM – Sidewall belt conveyors WKF

DI MATTEO Group - ODM – Sidewall belt conveyors WKF

Our Sidewall belt conveyor is suitable for horizontal, inclined, and vertical transportation of nearly all types of bulk materials, and it belongs to a group of equipment known as steep and vertical c...

DI MATTEO Group - ODM – Apron conveyors FZF/SZF/TZF

DI MATTEO Group - ODM – Apron conveyors FZF/SZF/TZF

Apron conveyors are suited for continuous conveyance of fine-grained to coarse-grained, heavy, sharp-edged, and hot bulk materials and break bulk goods.

DI MATTEO Group - ODM – Screw conveyors

DI MATTEO Group - ODM – Screw conveyors

Our screw conveyors provide transport your most varied and idiosyncratic materials, regardless of the angles – from horizontal to vertical.

DI MATTEO Group - ODM – Surface feeder GFK

DI MATTEO Group - ODM – Surface feeder GFK

Surface feeders are suitable for loading material, or feeding coarse and poor-flowing bulk materials or break bulk goods. Conveyor systems have to be able to hold up to a lot, when it comes to coarse...

DI MATTEO Group - ODM – Drag chain conveyors TKF/KKF

DI MATTEO Group - ODM – Drag chain conveyors TKF/KKF

When it comes to continuous conveyors, the drag chain conveyor (also known as the spillage conveyor) is counted among the most tested and important kinds of transport for a wide variety of bulk materi...

DI MATTEO Group - ODM – Pipe elbow QuattroTUBE

DI MATTEO Group - ODM – Pipe elbow QuattroTUBE

Pipe elbows are used in pressure and vacuum conveyance in nearly all industrial branches that deal with bulk materials. Pneumatic conveyors are very popular due to their simple construction and flexib...

DI MATTEO Group - ODM – High capacity bucket elevators BW

DI MATTEO Group - ODM – High capacity bucket elevators BW

Belt, chain, and central-chain bucket elevators for a continuous, vertical transport of materials from powdered to grainy consistence DI MATTEO has been a leader in the production of high-capacity bu...

DI MATTEO Group - ODM – Belt conveyors MGF/FGF/DGF/InBoxBelt

DI MATTEO Group - ODM – Belt conveyors MGF/FGF/DGF/InBoxBelt

Flat and troughed belt conveyors – also known as continuous conveyors – for uninterrupted transport of your materials Experience has proven that the classical continuous conveyor is still a conte...

DI MATTEO Group - ODM – Injector rotary valves IZS

DI MATTEO Group - ODM – Injector rotary valves IZS

Injector rotary valve / Injector systems are used to pneumatically transport bulk materials.

DI MATTEO Group - ODM – Pipe conveyors RGF

DI MATTEO Group - ODM – Pipe conveyors RGF

Continuous conveyor for non-stop, curve-filled transport of materials over large distances – without losing materials or causing immisions

DI MATTEO Group - ODM – WeighTUBE® RWS-G2

DI MATTEO Group - ODM – WeighTUBE® RWS-G2

WeighTUBE®: A revolution in dosing alternative fuels, biomass, and all other powdered and granular materials The second generation of our proven dosing scale WeighTUBE® will meet all of your needs, ...

Walter Gondrom - Massive Storz Safety Clamp type "ZICO"

Walter Gondrom - Massive Storz Safety Clamp type "ZICO"

With the "ZICO" safety clamp for Storz couplings, Walter Gondrom GmbH & Co.KG exclusively sells a product that offers comprehensive safety against loose shaking of Storz couplings. In contrast to actu...

Walter Gondrom - Butterfly valves for bulk trailer

Walter Gondrom - Butterfly valves for bulk trailer

Silo-Butterfly Valves – highly developed for the market. Last year a project team was formed here at Gondrom with the task to create, develop and produce a new Silo Butterfly valve. Based on our dec...

Yara Industrial GmbH - Yara Towards further NOx reduction - SNCR Systems

Yara Industrial GmbH - Yara Towards further NOx reduction - SNCR Systems

NOx regulations are becoming more and more stringent. In Europe NOx ELVs has gone from 800 mg/Nm3 down to 500 and even 200 mg/Nm3 depending on initial levels of NOx after primary measures, percent of ...

Schenck Process Europe GmbH - vibe2know™ ― the new app from Schenck Process

Schenck Process Europe GmbH - vibe2know™ ― the new app from Schenck Process

The easy way to measure the performance of your vibrating machines Get a quick overview of the general condition of your vibrating machines, simply and intuitively. The vibe2know™ app from Schenck ...

Bascules Robbe nv - Semi-automatic filling line for bags with big bag filling station

Bascules Robbe nv - Semi-automatic filling line for bags with big bag filling station

Customer specific design for filling line with following demands: Bunker 8 m³, special design for forklift trucks Cosucra Access to bunker via caged ladder Filling of 25 – 35 kg sacks Forming an...

JACOB Rohrsysteme - Quieter - Less noise, optimised safety thanks to silencers

JACOB Rohrsysteme - Quieter - Less noise, optimised safety thanks to silencers

In pipework systems, noticeable noise cannot be avoided. To be able to teach your production systems to whisper, we offer silencers with JACOB-compatible elements. They are available as inline silence...

JACOB Rohrsysteme - The JACOB Webshop has the lot!

JACOB Rohrsysteme - The JACOB Webshop has the lot!

Simple planning, ordering and managing Available 24/7 Project administration tool Order history Live Stock Track & Trace Service

JACOB Rohrsysteme - Modular Pipework Systems from JACOB

JACOB Rohrsysteme - Modular Pipework Systems from JACOB

JACOB is no.1 for modular pipework systems in Europe. Conveying pipe systems for bulk goods handling and dust extraction as well as ventilation plants for environmental change to applications are the ...

JACOB Rohrsysteme - Reliable Particle Separation with Cyclones

JACOB Rohrsysteme - Reliable Particle Separation with Cyclones

During industrial processes, it is often necessary to remove particles from the air or gas flow. This is done when raw materials are recovered, but also when the air flow is cleaned. The JACOB portfol...

KÖBO GmbH & Co. KG - Working hand in hand with the Bulkhandling Industry

KÖBO GmbH & Co. KG - Working hand in hand with the Bulkhandling Industry

Working hand in hand with the Bulkhandling Industry

SPALECK GmbH & Co. KG - SPALECK ActiveCLEAN Vibratory Feeder

SPALECK GmbH & Co. KG - SPALECK ActiveCLEAN Vibratory Feeder

ActiveCLEAN Vibratory Feeder 100% self-cleaning. 100% material flow. ActiveCLEAN - For the ultimate clean and economic processing in front of sorting-machines Spaleck‘s ActiveCLEAN Vibratory Feede...

Euromecc S.r.l. - Mobile system for cement temporary storage and direct transfer from vessel to tankers

Euromecc S.r.l. - Mobile system for cement temporary storage and direct transfer from vessel to tankers

EUROMECC mobile flat storage terminal is a structure on wheels for cement temporary storage and direct transfer from self-unloading vessels to tankers. FAST The system allows to pass rapidly from th...

Euromecc S.r.l. - Ship unloading conveyors for bulk material

Euromecc S.r.l. - Ship unloading conveyors for bulk material

The ship unloading conveyors comprises an equipment made of a mobile hopper on wheels and mobile conveyor belts. The hopper collects the bulk material from the mobile shaft of the self-unloading ship,...

Euromecc S.r.l. - Shiploader

Euromecc S.r.l. - Shiploader

Euromecc Mobile Shiploaders are designed to speed vessel loading handling the complete range of dry bulk cargoes. Mobile Shiploaders offer the level of performance normally associated with fixed insta...

Euromecc S.r.l. - Modular Terminals

Euromecc S.r.l. - Modular Terminals

The Port Terminal of the series SPR is designed and realized for the cement storage. The cement is unloaded, with pneumatic system, from the ships. It is a modular plant composed by one or more silos ...

Euromecc S.r.l. - Dynamic Mixers

Euromecc S.r.l. - Dynamic Mixers

Euromecc Dynamic mixer arises from the revision of twin shaft mixer “MEB” for single cycle production. Through accurate modifications applied to shafts, axles and mixing blades, we achieved to sa...

Euromecc S.r.l. - Continuous mixers

Euromecc S.r.l. - Continuous mixers

MEC continuous mixers are a powerful and reliable solution for continuous mixing processes, especially for big size aggregates. They are in fact suitable for rolled compacted concrete and lean concret...

Euromecc S.r.l. - Planetary mixers

Euromecc S.r.l. - Planetary mixers

In MEP mixers the simultaneous rotation and revolution performed by mixing arms confers a superior homogeneous mixture quality in a restrained time. ADVANTAGES - Top quality mixture. - Reduced number ...

Euromecc S.r.l. - Twin shaft mixers MEB

Euromecc S.r.l. - Twin shaft mixers MEB

Euromecc MEB Twin shaft mixers are ideal for ready mixed concrete production, RCC for dams, cement mixture and precast concrete industry. The usage of the Twin Shaft Mixer allows premixing of aggrega...

Euromecc S.r.l. - PORT TECHNOLOGY

Euromecc S.r.l. - PORT TECHNOLOGY

The Terminal designed and produced by Euromecc for the storage of powder material (cement, filler, flying ashes) introduce some technical-qualitative features that make them products of high level des...

STAG Schüttguttechnik - Chain conveyor

STAG Schüttguttechnik - Chain conveyor

The functionality is based on the movement of an endless chain that is driven in a trough by an interlocked transmission chain. In addition to its use as a horizontal conveyor up to a length of 40 met...

STAG Schüttguttechnik - STAG Lump Breaker KB

STAG Schüttguttechnik - STAG Lump Breaker KB

The STAG Lump Breaker KB is developed for breaking up bulk materials and no dulized bulk materials. With the employment of a STAG Lump Breaker KB, oversized particles are broken down to a defined gran...

STAG Schüttguttechnik - STAG Pressure Conveying Vessel PCV

STAG Schüttguttechnik - STAG Pressure Conveying Vessel PCV

For demanding tasks, high conveyance capacities and long conveyance distances. Our STAG Pressure Conveying Vessel PCV for pneumatic conveyance, using the dense flow method, guarantees conveyance proce...

Prodecologia, SMF - Drum magnetic separator type BS

Prodecologia, SMF - Drum magnetic separator type BS

Designed for dry enrichment of ore and non-metallic materials as well as for refinement of various non-magnetic materials from magnetic impurities. Applied in mining, glass, ceramics, woodworking, foo...

Prodecologia, SMF - Eddy current magnetic separator type VS

Prodecologia, SMF - Eddy current magnetic separator type VS

Designed for extracting non-ferrous metals from nonelectroconductive materials. Installed on the lines of cullet, solid domestic waste, and metal scrap processing.

Prodecologia, SMF - Electrostatic separators type EBS (triboelectric)

Prodecologia, SMF - Electrostatic separators type EBS (triboelectric)

Designed for - dry separation of mixtures of polymers* by the electrophysical properties of the components, for example: PVC + rubber (crushed window profile), PVC + PE (shredded cable insulation), PE...

Prodecologia, SMF - Electrostatic separators type EBS (corona)

Prodecologia, SMF - Electrostatic separators type EBS (corona)

Designed for dry high-efficiency separation of materials, that are differ in their electric properties: - mixtures of plastics and metals, including shredded cables, into metal (copper, aluminium), an...

FTK Förderband Technik Kilian GmbH - secondary scraper

FTK Förderband Technik Kilian GmbH - secondary scraper

Abstreifer mit Spindelverlagerung für leichte bis schwere Einsätze.

Dziomba Fördertechnik GmbH - Umlenktrommel mit Spezialinnenlagerung

Dziomba Fördertechnik GmbH - Umlenktrommel mit Spezialinnenlagerung

Dziomba-Spezialinnenlagerung für schwere Belastung mit Wellenschmierung (auch während des Betriebes) primär für Berg- und Tunnelbau

Dziomba Fördertechnik GmbH - Umlenktrommel mit Spezialinnenlagerung

Dziomba Fördertechnik GmbH - Umlenktrommel mit Spezialinnenlagerung

Dziomba-Spezialinnenlagerung für schwere Belastung mit Wellenschmierung (auch während des Betriebes) primär für Berg- und Tunnelbau

Dziomba Fördertechnik GmbH - Trommel mit Spezialkeramikbelag

Dziomba Fördertechnik GmbH - Trommel mit Spezialkeramikbelag

Wir liefern Trommelbeläge für vielfältige Einsatzmöglichkeiten

CARBOTECHNIK Energiesysteme GmbH - silo systems

CARBOTECHNIK Energiesysteme GmbH - silo systems

Depending on customer and individual requirements, we specialise in storing combustible dusts such as pulverised lignite. Carbotechnik silo systems are the most economical solution for storing pulver...

CARBOTECHNIK Energiesysteme GmbH - boiler systems

CARBOTECHNIK Energiesysteme GmbH - boiler systems

By using the unique technology of our pulse burner systems, boiler systems can be fired with pulverised lignite. The most economical and efficient option for our customers to realise their heat, stea...

FTK Förderband Technik Kilian GmbH - Haubenbefestigung

FTK Förderband Technik Kilian GmbH - Haubenbefestigung

Type L L-Hook Galvanized or stainless steel L-hook with washer and nut. Note: According to the building regulations, the building owner or his representative must provide a structural analysis of th...

FTK Förderband Technik Kilian GmbH - Type H Hook  Galvanized or stainless steel hook bolt with washer and nut.

FTK Förderband Technik Kilian GmbH - Type H Hook Galvanized or stainless steel hook bolt with washer and nut.

Type H Hook Galvanized or stainless steel hook bolt with washer and nut.

FTK Förderband Technik Kilian GmbH - Clamps Typ K

FTK Förderband Technik Kilian GmbH - Clamps Typ K

Type K* Clamps Rounded V2A tightening strap with clamping piece, tension spring and handle – all stainless steel. This ingenious system from Achenbach is the best-selling fastening.

FTK Förderband Technik Kilian GmbH - Organit hooded covers

FTK Förderband Technik Kilian GmbH - Organit hooded covers

We completed our diverse portfolio expanding on the market of plastic made Organit-covers. Different sectors of industry require alternatives to the metal systems due to legally prescribed conditions....

FTK Förderband Technik Kilian GmbH - Lower chord cladding

FTK Förderband Technik Kilian GmbH - Lower chord cladding

Lower chord cladding Cladding of the lower chord is more and more frequently required to provide protection against weathering and for the prevention of accidents. FTK Förderband Technik Kilian Gmb...

FTK Förderband Technik Kilian GmbH - Elliptical head cover

FTK Förderband Technik Kilian GmbH - Elliptical head cover

Elliptical head cover - flate shape and high efficiency With its flat design, it is ideally suitable for conveyor belts with superstructures, e.g., loaders for vessels. Available in any cover size an...

FTK Förderband Technik Kilian GmbH - Scheme arch cover

FTK Förderband Technik Kilian GmbH - Scheme arch cover

This type of cover is an arched roof with a low pitch. Basically, the simple construction without straight haunches ensures suffi cient protection of conveyance materials. This system is available fo...

Otto Ganter GmbH & Co. KG - Special solution becomes standard

Otto Ganter GmbH & Co. KG - Special solution becomes standard

When it comes to cam action indexing plungers, Ganter offers something very special: the new cam action indexing plungers from the GN 721 series with stop for left- or right-handed operation availabl...

Otto Ganter GmbH & Co. KG - Mounting clamps with high retaining power

Otto Ganter GmbH & Co. KG - Mounting clamps with high retaining power

New to Ganter’s product range: Mounting clamps with swivel ball joint for precise adjustments with high stop torque for low torque power as well as the option of customer-specific adaptations. For ...

Otto Ganter GmbH & Co. KG - For the perfect edge

Otto Ganter GmbH & Co. KG - For the perfect edge

The highest quality: Ganter is introducing a range of edge protection profiles with and without sealing function Ganter is expanding its range of products once again. Edge protections profiles and edg...

Binder + Co. - CLARITY sorting system

Binder + Co. - CLARITY sorting system

The CLARITY is much more than just an optical sorting device; it can help you transform your recyclable materials into hard cash. Sensor Fusion by Binder+Co – we adapt our sorting systems to the sp...

Otto Ganter GmbH & Co. KG - Toggle clamp product range expanded

Otto Ganter GmbH & Co. KG - Toggle clamp product range expanded

Latch-type toggle clamps, such as vertical and horizontal acting toggle clamps, have been a permanent feature of the Ganter product range for over 30 years. The expansion of both toggle clamp genres m...

Huning Anlagenbau GmbH & Co. KG - Walkingfloor

Huning Anlagenbau GmbH & Co. KG - Walkingfloor

* Perfekt for material with a low bulk weight * Transportation of e.g.: Horse, cow and turkey dung, wood chips, foil chips and other waste materials * Output capacity: up to 50m³/h (product-dependent...

MOLINARI Recycling - Shredder for ELT

MOLINARI Recycling - Shredder for ELT

NEW Primary shredder for End Life Tyres. The perfect machinery for alternative fuels or secondary raw material. High productivity with low energy consumption. Two independent shafts with staggered b...

WiPA GmbH - WiPa Sifter units

WiPA GmbH - WiPa Sifter units

The air classifiers of the WS and WK series serve to separate materials of different specific densities and/or sizes. Materials with low specific density are “sucked in” by using negative pressure...

WiPA GmbH - WiPa Granulators

WiPA GmbH - WiPa Granulators

The WiPa granulators of the G series are compact and robust machinery for size reduction of different products from the plastics processing industry. Advantages: Economical and energy-saving size...

WiPA GmbH - WiPa Recycling system

WiPA GmbH - WiPa Recycling system

WiPa develops with the recycling system ZTE a pelletizing unit for most plastics. The most advanced pelletizing system! Degassing takes place by means of powerful vacuum pumps Both cylinder and screw...

WiPA GmbH - WiPa Big Bag Filling Systems

WiPA GmbH - WiPa Big Bag Filling Systems

High filling capacity and individual adjustment to different filling tasks. The sophisticated modular design and numerous combinable options enable bagging up of a wide variety of products and bulk m...

WiPA GmbH - WiPa Silo

WiPA GmbH - WiPa Silo

The WiPa Silo is a modular construction that can be almost unlimitedly adjusted and extended according to individual requirements. Due to its innovative push bar system up to 70% energy can be saved i...

WiPA GmbH - WiPa continuous guillotine cutters

WiPA GmbH - WiPa continuous guillotine cutters

WiPa continuous guillotine cutters have been especially designed to shred fibres and textiles. Additionally, they can also process films, foils, fleece and nonwovens. The cutting gap can be adju...

WiPA GmbH - WiPa Intensive cleaner

WiPA GmbH - WiPa Intensive cleaner

The WiPa Intensive cleaner type MD can be used for cleaning plastics with water, but also for dry cleaning processes. Furthermore, the equipment can be used as a dryer. For example, after a washing li...

WiPA GmbH - WiPa Friction washer

WiPA GmbH - WiPa Friction washer

The WiPa friction washer type FW is used for intensive washing and also for dewatering plastics. Advantages: Effective cleaning with cold or warm water Improved separation due to approximatel...

WiPA GmbH - WiPa Pre-wash screw

WiPA GmbH - WiPa Pre-wash screw

The WiPa pre-wash screws are used to wash, rinse, soak and separate sinking contamination substances such as stones, sand or glass. Benefits: Separation of impurities from the product Soakin...

HFB Wälzlager-Gehäusetechnik GmbH - Flexible couplings

HFB Wälzlager-Gehäusetechnik GmbH - Flexible couplings

Flexible couplings for general engineering applications

HFB Wälzlager-Gehäusetechnik GmbH - SDAF

HFB Wälzlager-Gehäusetechnik GmbH - SDAF

Split plummer blocks in imperial dimensions for extremely highly-loaded bearings

HFB Wälzlager-Gehäusetechnik GmbH - SAF/SAW

HFB Wälzlager-Gehäusetechnik GmbH - SAF/SAW

SAF/SAW – Split plummer blocks in imperial dimensions

WiPA GmbH - WiPa Plast Compactor

WiPA GmbH - WiPa Plast Compactor

The WiPa Plast Compactor Type PC is an agglomerator for gentle densification of plastics with low bulk density, for example: Fibres, films, stretch film, foamed materials, powder or fine particles. D...

NUBA Screening Media - Crusher Wear and Spare Parts

NUBA Screening Media - Crusher Wear and Spare Parts

You can also download all technical data in our website.

NUBA Screening Media - Other Products and Accesories

NUBA Screening Media - Other Products and Accesories

You can also download all technical data in our website.

NUBA Screening Media - Vibrating Finger Screens

NUBA Screening Media - Vibrating Finger Screens

You can also download all technical data in our website.

NUBA Screening Media - Wedge Wire Screens

NUBA Screening Media - Wedge Wire Screens

You can also download all technical data in our website.

NUBA Screening Media - Electro-welded Screens

NUBA Screening Media - Electro-welded Screens

You can also download all technical data in our website.

NUBA Screening Media - Perforated Metal Plate

NUBA Screening Media - Perforated Metal Plate

You can also download all technical data in our website.

NUBA Screening Media - Rubber Screens

NUBA Screening Media - Rubber Screens

You can also download all technical data in our website.

NUBA Screening Media - Polyurethane Screens

NUBA Screening Media - Polyurethane Screens

You can also download all technical data in our website.

NUBA Screening Media - Self-cleaning Screens

NUBA Screening Media - Self-cleaning Screens

You can also download all technical data in our website.

NUBA Screening Media - Metallic Screens

NUBA Screening Media - Metallic Screens

You can also download all technical data in our website.

Amixon MIXING TECHNOLOGY GmbH - KoneSlid® Mischer

Amixon MIXING TECHNOLOGY GmbH - KoneSlid® Mischer

Producers of infant formula bear a great responsibility. Baby food must be healthy and one hundred percent pure. These high quality demands are only met if the raw material components are prepared in ...

foxiflex GmbH & Co.KG - foxiPremium Induvac

foxiflex GmbH & Co.KG - foxiPremium Induvac

New generation of hose!!!! Smooth inner surface abrasion resistant and extremely flexible protection hose. Suitable for use in zone 20 ATEX / TRGS 727 for the download of electro-static build-up when ...

Horsthemke GmbH - Slag extractor

Horsthemke GmbH - Slag extractor

- Slat-band chain version - Robust waterproof design - Low-maintenance special sealing on the deflection shaft - Different materials possible - Tensioning station outside the water - Large inspection ...

Horsthemke GmbH - Trough chain conveyor

- Dry or wet conveying - Dustproof / waterproof design - External bearing - Different materials possible - Different shaft seals possible - Bush conveyor or forked lug chain (single-strand or double-s...

Horsthemke GmbH - Loading bellows

- Single or double hose design - Robust dustproof design - Central rope or multi-rope version - Slack rope limit switch - Winch with stroke limiter and emergency hand crank - Overfill monitoring at th...

Horsthemke GmbH - Screw conveyor

Trough screw conveyors/ Pipe screw conveyors/ Double screw conveyors/ Metering screw conveyors/ Spiral screw conveyors/ Cooling screw conveyors/ Discharge screw conveyors - Robust rustproof design - ...

Horsthemke GmbH - Double pendulum flaps

- Actuated by an electric motor with cam and spring return - Pneumatically actuated - Hydraulically actuated - Weight actuated - Robust dustproof design - External bearing - Different materials possib...

Horsthemke GmbH - Bucket elevator

Horsthemke GmbH - Bucket elevator

Belt or chain bucket conveyor - Robust dustproof design - Box or double-pipe design - Bucket according to the standard or as a high-performance bucket - Maintenance-free parallel tensioning device - ...

Horsthemke GmbH - Rotary valves

Product range - Vertical rotary valve - Tangential rotary valve - Horizontal rotary valve Main features - Robust dustproof design - External bearing - Different materials possible - Different shaft s...

Horsthemke GmbH - Lump breakers

- Robust dustproof design - External bearing - Different materials possible - Different shaft seals possible - Crushing teeth armored - Large inspection openings - Power transmission by means of a sli...

VAUTID GmbH - VAUTID Company brochure

VAUTID GmbH - VAUTID Company brochure

Further information on VAUTID products and services can be found in our company brochure or on our website www.vautid.com

F & D Wägetechnik-Waagenbau GmbH - Bagging weigher B-SWA foodline

F & D Wägetechnik-Waagenbau GmbH - Bagging weigher B-SWA foodline

High-precision gross bagging system for foods and additives Use: - for floury bulk materials, from free to bad flowing - Suitable for paper or plastic bags, cartons with PE-Inlet and bucket Constructi...

Global Cement Magazine - Global Gypsum Magazine

Global Cement Magazine - Global Gypsum Magazine

Global Gypsum Magazine is unique in the gypsum and insulation industries in allowing registered users to download the full digital magazine every issue. It is required reading for gypsum and insulatio...

Bürkert Fluid Control Systems - Pneumatic

Bürkert Fluid Control Systems - Pneumatic

Bürkert offers individual pilot valves and so-called valve islands – designed as plurality of control valves on an island for installation in control cabinet solutions – for pneumatic valve actua...

Bürkert Fluid Control Systems - Pneumatically controlled process valves

Bürkert Fluid Control Systems - Pneumatically controlled process valves

Seat valves, with angle-seat or globe armature, ensure precise results when used as control valve. These very compact valves are available in orifice sizes from 4mm to 100mm and can be used fluid pres...

Bürkert Fluid Control Systems - Solenoid shut-off valves

Bürkert Fluid Control Systems - Solenoid shut-off valves

The solenoid valve portfolio includes direct acting and servo-assisted solenoid valves. Direct acting solenoid valves are useful for small orifices, servo-assisted solenoid valves, however, for large ...

STAG Schüttguttechnik - STAG Turn Slide Valve MVP-I

STAG Schüttguttechnik - STAG Turn Slide Valve MVP-I

The STAG Turn Slide Valve MVP-I is an armature especially designed for the STAG Pressure Conveying Vessel PCV and applicable for any bulk material. It is integrated into ablank flange and forms an uni...

Hosokawa Alpine AG - BALL MILL / CLASSIFIER SYSTEM

Hosokawa Alpine AG - BALL MILL / CLASSIFIER SYSTEM

A ball mill/classifier system as a pilot plant for testing in production scale is completely installed in shippers own container. Different products as well as different finenesses for individual app...

ESSER-WERKE GmbH & Co. KG - ESSER QUICK-FIX System

ESSER-WERKE GmbH & Co. KG - ESSER QUICK-FIX System

Modular elbow for pneumatic systems with extrem high wear.

ENCKEL Sp. Zo.o - Daily bins

ENCKEL Sp. Zo.o - Daily bins

The storage bins are dedicated for storage, conveying and handling of plastic materials. Available in 6 standard sizes from 60 to 1,800 dm3, they are completely built in stainless steel and are equipp...

ENCKEL Sp. Zo.o - Connections

ENCKEL Sp. Zo.o - Connections

A series of connections realized in stainless steel, suitable for assembling the conveying system pipelines. These connections are made with laser technology and extreme precision to obtain suitable p...

ENCKEL Sp. Zo.o - Transport pipelines

ENCKEL Sp. Zo.o - Transport pipelines

Several solutions for any requirements are available for the realization of centralized transport plants. The pipelines are made of stainless steel. They are warranty of cleaning, non-toxicity and lon...

ENCKEL Sp. Zo.o - Pipes coupling

ENCKEL Sp. Zo.o - Pipes coupling

The pipes couplings are produced in different versions to realize solutions dedicated to different uses. - BILOCK - TRILOCK - Stainless steel HIGH TEMPERATURE - Stainless steel for PYREX - Stainless s...

ENCKEL Sp. Zo.o - Conveying bends

ENCKEL Sp. Zo.o - Conveying bends

For plastic granule and powder conveying different bends solutions exist with several radiuses of curvature. The anti-wear version can convey material with up to 40% glass fiber with 5 years warranty....

BRILEX Gesellschaft für Explosionsschutz mbH - Explosion Diverter

BRILEX Gesellschaft für Explosionsschutz mbH - Explosion Diverter

Explosion Diverters were probably the most original variant for protection against dangerous flame radiations in interconnected containers. The advantage of this method was always that it provided pro...

Hosokawa Alpine AG - ALPINE PULVIS

Hosokawa Alpine AG - ALPINE PULVIS

The PULVIS was developed as an energy-efficient ultra-fine grinding machine. This high-efficiency mill produces sub-micron size particles. The PULVIS is the right choice for the ultra-fine grinding of...

Hosokawa Alpine AG - FINE IMPACT MILL UPZ

Hosokawa Alpine AG - FINE IMPACT MILL UPZ

Hosokawa Alpine Ultraplex UPZ fine impact mills offer versatility in use combined with simplicity in operation. Because of the wide variety of feed materials, where every comminution task demands its ...

MeWa Waagenservice und Getreidetechnik GmbH - Materialhandler Scale X-Loadtronic 3MH

MeWa Waagenservice und Getreidetechnik GmbH - Materialhandler Scale X-Loadtronic 3MH

The hydraulic weighing system is specifically designed for material handlers and available as a calibrated system. With the 3MH system, flexible operation of a multisection grab and other suspended at...

MeWa Waagenservice und Getreidetechnik GmbH - Excavator Scale X-Loadtronic 3E

MeWa Waagenservice und Getreidetechnik GmbH - Excavator Scale X-Loadtronic 3E

Adapted for mobile and chain excavators (monoblock boom) with a bucket attachment or demolition and sorting grabs. Integration into products of all current manufacturers is possible. The calibrated X-...

MeWa Waagenservice und Getreidetechnik GmbH - Wheelloader Scale X-Loadtronic 3

MeWa Waagenservice und Getreidetechnik GmbH - Wheelloader Scale X-Loadtronic 3

The weighing system for wheel loaders can be integrated into products of all current manufacturers. Featuring very high measurement accuracy, it is one of the most accurate systems in the market – a...

MeWa Waagenservice und Getreidetechnik GmbH - Big-Bag Scales

MeWa Waagenservice und Getreidetechnik GmbH - Big-Bag Scales

Our Big-Bag scale systems are tailor-made for working conditions and environments where bulk materials are filled, sacked or emptied.

MeWa Waagenservice und Getreidetechnik GmbH - Wagon weighbridge GLW120 Stahl

MeWa Waagenservice und Getreidetechnik GmbH - Wagon weighbridge GLW120 Stahl

Our weighbridges enable precise weighing of standing or moving trains – depending on the design version with different track widths and installation variants, whether train formations or separate ca...

MeWa Waagenservice und Getreidetechnik GmbH - Truckscale MeWa Mobil

MeWa Waagenservice und Getreidetechnik GmbH - Truckscale MeWa Mobil

The mobile design of truck scales convinces with flexibility. Their modular design is most beneficial especially when used in different weighing locations such as construction sites or mines.

Alvibra - Alvibra Vibrationssiebmaschinen

Alvibra - Alvibra Vibrationssiebmaschinen

Die Vibrationssiebmaschinen von Alvibra erledigen viele verschiedene interne Aufgaben in Verbindung mit dem Sieben von Pulver, Granulat und körnigen Produkten. Je nach Produkt kann dies in einem offe...

Alvibra - Alvibra Vibrationsdosierer

Alvibra - Alvibra Vibrationsdosierer

Die Vibrationsdosierer von Alvibra erledigen viele verschiedene interne Dosierungsaufgaben in Verbindung mit dem Transport, der Bearbeitung, der Zufuhr und der Abgabe von Pulver, Granulat und körnig...

Alvibra - Alvibra Vibratory Conveyors

Alvibra - Alvibra Vibratory Conveyors

Die Vibrationsförderer von Alvibra erledigen viele verschiedene interne Transportaufgaben in Verbindung mit dem Transport von Pulver, Granulat und körnigen Produkten. Je nach Produkt kann der Transp...

TEWE Elektronic GmbH & Co. KG - TEWE valve VT60 with double-acting air cylinder

TEWE Elektronic GmbH & Co. KG - TEWE valve VT60 with double-acting air cylinder

TEWE valve VT60 with double-acting air cylinder Ø 20 mm, 125 mm stroke, 24N-2-A-20A125, to be opened and closed pneumatically, complete with 1 galv. piston rod nut M8 with 1 plastic cover cap M8, bl...

TEWE Elektronic GmbH & Co. KG - CHAIN FEED deflection corner 90°

CHAIN FEED deflection corner 90°, optional plastic (glass reinforced plastics) or V2A stainless steel casing, with groove, with ball bearing or slide bearing available, cast deflection wheel wit...

TEWE Elektronic GmbH & Co. KG - CHAIN FEED conveyor chain LONG LIFE+

TEWE Elektronic GmbH & Co. KG - CHAIN FEED conveyor chain LONG LIFE+

CHAIN FEED conveyor chain LONG LIFE+ blue galvanized, every second link with welded stud, on which the Tab is mounted = shifting of Tabs no longer possible. Chain with surface hardening = long-term le...

TEWE Elektronic GmbH & Co. KG - CHAINFEED receiving station, SS AISI 304

TEWE Elektronic GmbH & Co. KG - CHAINFEED receiving station, SS AISI 304

CHAINFEED receiving station, SS AISI 304 infeed via ROTOR in conveying direction without return flow, with gear motor 0.18 kW, 230/400 Volt, 50 Hz, 14 rpm for approx. 50 % filling conveyor pipe = appr...

Keyser & Mackay - FreeGlide (R) Inline Sampler

Keyser & Mackay - FreeGlide (R) Inline Sampler

Manufactured by Sampling Systems Ltd the FreeGlide (R) Inline sampler is the ideal solution to take samples from e.g. down pipes. The sampler is completely made of pharmaceutical conform materials, ca...

Keyser & Mackay - MUCON "Oyster" Specials

Keyser & Mackay - MUCON "Oyster" Specials

MUCON „Oyster Composite“ Butterfly valve for fine dosage of powders and granules. The item is a combination of a standard butterfly valve and a fine dosage ball, which e.g. before a target weight ...

Keyser & Mackay - MUCON "Oyster" stainless steel butterfly valves

Keyser & Mackay - MUCON "Oyster" stainless steel butterfly valves

Top quality butterfly valves suitable for highest hygienic applications made of 316L stainless steel including FDA approved elastomer gaskets. Either with bolted body or as “compact” version with ...

Keyser & Mackay - Rugged NIR Tester

Keyser & Mackay - Rugged NIR Tester

The devices produced by Process Sensors Ltd use the near infrared (NIR) technology to measure moisture without product contact, contamination, destruction and work in real time. The integrated 5,7” ...

Th. Scholten GmbH & Co. KG - Verschleiß- und Korrosionsschutz - Cast basalt for industrial floors

Th. Scholten GmbH & Co. KG - Verschleiß- und Korrosionsschutz - Cast basalt for industrial floors

For more than 60 years Th. Scholten GmbH & Co. KH from Wülfrath (North-Rhine Westphalia) has been using basalt in industrial wear and corrosion protection. They are the exclusive representative of th...

Th. Scholten GmbH & Co. KG - Verschleiß- und Korrosionsschutz - Cast basalt for industrial wastewater

Th. Scholten GmbH & Co. KG - Verschleiß- und Korrosionsschutz - Cast basalt for industrial wastewater

For more than 60 years Th. Scholten GmbH & Co. KH from Wülfrath (North-Rhine Westphalia) has been using basalt in industrial wear and corrosion protection. They are the exclusive representative of th...

Keyser & Mackay - NEW KS Iris Diaphragm Valve (German)

Keyser & Mackay - NEW KS Iris Diaphragm Valve (German)

Hand operated, stainless steel Iris Diaphragm Valve. FDA approved diaphragms. Cost effective, single flanged version. Perfectly suited to be used at IBC's in food and pharmaceutical environments. Keys...

Keyser & Mackay - KEK centrifugal sifter !!! Will be displayed at Stand B28 - 4 !!!

Keyser & Mackay - KEK centrifugal sifter !!! Will be displayed at Stand B28 - 4 !!!

Short description of the key benefits of the KEK centrifugal sifter (German). Keyser & Mackay distributes these machines only in Germany. For other countries, please contact Process Components Ltd, 00...

Keyser & Mackay - Full Range Brochure Sampling Systems Ltd.

Keyser & Mackay - Full Range Brochure Sampling Systems Ltd.

Full range brochure of sampling equipment. Containing over 1,200 items, manufactured in England by company Sampling Systems Ltd., Over 1 million items on stock for fast worldwide delivery. Distributed...

ProMinent GmbH - Metering System POLYMORE

ProMinent GmbH - Metering System POLYMORE

The POLYMORE metering system is an inline polymer batching system for processing liquid polymers. The unit was designed for wall-mounting and requires little space. Only water, liquid polymer and supp...

ProMinent GmbH - Tomal® Multi-Screw Feeder

ProMinent GmbH - Tomal® Multi-Screw Feeder

Tomal® Multi-Screw Feeders reduce the costs of your production process by providing consistent emptying and precision metering. This avoids expensive metering errors and achieves the optimum recipe. ...

Schenck Process Europe GmbH - MechaTron® Coni-Steel vibratory feeder

Schenck Process Europe GmbH - MechaTron® Coni-Steel vibratory feeder

Schenck Process has the perfect solution for stringent requirements. Our gravimetric vibratory feeder MechaTron® Coni-Steel delivers highly accurate and consistent feeding of superabsorbent polymers....

FORREC SRL - MULTI-CRUSHER FR

FORREC SRL - MULTI-CRUSHER FR

The multi-crusher series FR is designed to be installed as primary machine in plants for the treatment of municipal solid waste, bulky waste, industrial waste and for all kinds of materials. The innov...

SysTec GmbH - IT3

SysTec GmbH - IT3

In perfect time for the SOLIDS 2017 exhibition (Schüttgut) SysTec GmbH introduces the IT3 weighing terminal as the successor of the IT3000, the weighing terminal that has been very successful for mor...

WAGENER Schwelm GmbH & Co. - NEW

Vulcolite FL - up to 23% lower!

WAGENER Schwelm GmbH & Co. - Mechanical Engineering

Vulcanizing presses for each application.

Aquaco BV - Adiabatic cooling

Aquaco BV - Adiabatic cooling

Higher cooling capacity; lower energy consumption Cooling capacity can be increased by up to 30% by placing a mist system around roof-based condensers. This is possible by using the natural principle ...

HS Umformtechnik GmbH - DWR Double-skin high wear-resistant stainless steel pipe bends

HS Umformtechnik GmbH - DWR Double-skin high wear-resistant stainless steel pipe bends

Our highly wear-resistant DWR double-skin pipe bends are available in two product versions: 1. “Product-on-product” version In this variant, the classic “double skin” comes into effec...

igus® - Rise protection, easy to retro-fit

igus® - Rise protection, easy to retro-fit

When guiding e-chains® on very long travels or in case of highest push/pull forces the igus rise protection gives you more security. The rise protection is now available as a ready-to-install module ...

igus® - Energy chain solutions for fast rotational movements, from stock

igus® - Energy chain solutions for fast rotational movements, from stock

Standard modular RBR systems achieve up to 360 degrees per second for reliable rotary movements For several years igus has been developing customised systems for circular movements with energy chains...

igus® - basic flizz®

igus® - basic flizz®

- Low-maintenance system for travel up to 100 m - Other sizes and versions available, travel up to 200 m and more with E2 roller e-chains® - Protection against weather and dirt exposure - Cost-effect...

igus® - Series 5050HD - chain, with crossbars every link

igus® - Series 5050HD - chain, with crossbars every link

1. Very high stability due to undercut design 2. Very high torsional rigidity 3. High tensile stability (20% more tensile strength than in the case of Series 5050) 4. Very wide gliding surfaces, low w...

SIRCATENE SPA - Manganese Wear Rails

SIRCATENE SPA - Manganese Wear Rails

Manganese wear rails with central groove in steel X120Mn12

SIRCATENE SPA - Sprockets and Wheels

SIRCATENE SPA - Sprockets and Wheels

Sircatene provide wheels and sprockets for conveyor and transmission chains, and also engineer large sprockets ensuring maximum precision during mechanical processing. Guarantees perfect sprocket-chai...

SIRCATENE SPA - Traction Chains

SIRCATENE SPA - Traction Chains

The range of Sircatene lifting chains comprises numerous products, both standard and customized such as Galle chains for sluice gates and dams or leaf chains for handling forging ingots that reach tem...

SIRCATENE SPA - Special Chains

SIRCATENE SPA - Special Chains

Specialist Sircatene chains are designed by our technical team according to customer's requirements and represent efficient and effective solutions for transmitting power and handling of any kind of m...

SIRCATENE SPA - Transmission chains

SIRCATENE SPA - Transmission chains

The mechanical qualities of Sircatene transmission chains ensure a long life of service and performance in any field of application. The anti-rotation flats, the strong riveting system, the treatments...

SIRCATENE SPA - Scraper Chains

SIRCATENE SPA - Scraper Chains

Designed to convey granular and powder materials or material resulted from transformation processes, Sircatene scraper chains can be used on a regular basis in many sectors from agro-food and chemical...

SIRCATENE SPA - Conveyor Chains

SIRCATENE SPA - Conveyor Chains

Our range of Sircatene conveyor chains features many products created from experience, manufacturing capacity and the technological innovation of Sircatene. The conveyor chains are available in a wide...

SIRCATENE SPA - Drop Forged Chains

SIRCATENE SPA - Drop Forged Chains

Reliable even under extreme conditions, Sircatene forged chains are used in many industrial sectors for conveying materials. Designed to work with heavy loads, they are resistant to wear and chemical ...

Zeppelin Systems - Smart Components

Zeppelin Systems - Smart Components

Zeppelin is setting trends in the digitalization of plants and components in the plastics industry Zeppelin Systems is moving a step closer to plant component digitalization with its Smart Components...

Dziomba Fördertechnik GmbH - TAT Trommel

Dziomba Fördertechnik GmbH - TAT Trommel

Tandem Trommel 800 Ø X 1600mm Welle 400/240/180ØX3990mm

Invicta Vibrators (A Division of Grantham Engineering Ltd) - BLz Base Mounted Vibrator

Invicta Vibrators (A Division of Grantham Engineering Ltd) - BLz Base Mounted Vibrator

A BLz vibrator suitable for Atex Zones 21 & 22 which is available in 2, 4, 6 and 8 pole configurations. With thirteen frame sizes to choose from, and with power ratings from 0.1 kW to 12.5 kW this ran...

bar pneumatische Steuerungssystme GmbH - bar-PCS

bar pneumatische Steuerungssystme GmbH - bar-PCS

Positioner for valves for safe and engery-efficient operation between air compressor and compressed air system. The system situation is controlled by this positioner in order to avoid ainticipated fai...

SIMATEK A/S - SimPact 4T-R pulse jet filter

SIMATEK A/S - SimPact 4T-R pulse jet filter

A cost-efficient, robust solution that gives you the benefit of high productivity and savings. The SimPact 4T-R filter has a compact, cylindrical design and an efficient pulse-jet cleaning system. Th...

Advanced Blending Solutions LLC. - Controls

Advanced Blending Solutions LLC. - Controls

CONTROLS offer data retention and historian, central control panel, and intuitive interface.

Advanced Blending Solutions LLC. - Manifolds

Advanced Blending Solutions LLC. - Manifolds

SVM Vacuum Sequence Manifolds enable each centralized vacuum pump to be connected to each vacuum receiver in the system. This leads to an optimal use of pump capacity, and a reliable material supply.

Advanced Blending Solutions LLC. - Velocity Control

Advanced Blending Solutions LLC. - Velocity Control

VELOCITY CONTROL is a unique solution developed by ABS to convey each material at its optimal conveying velocity. This saves energy and reduces or eliminates angel hair and dust creation.

Advanced Blending Solutions LLC. - SMART System

Advanced Blending Solutions LLC. - SMART System

SMART (Sequential Material Allocation and Redistribution Tower) is a revolutionary development geared to complex multi-layer co-extrusion systems and centralized large-scale plant material handling sy...

Advanced Blending Solutions LLC. - Blending

Advanced Blending Solutions LLC. - Blending

The SIMPLICITY Blender series combines high dosing accuracy, simple operation, and rapid material and recipe changes, allowing continuous blending of up to 10 components. The materials can vary in si...

Easyfairs Deutschland GmbH - maintenance Stuttgart 2017

Easyfairs Deutschland GmbH - maintenance Stuttgart 2017

In 2017, «maintenance Stuttgart» is taking place for the 4th time and is offering its visitors a wide range of solutions for all areas of industrial maintenance. Stuttgart is versatile in its econo...

Easyfairs Deutschland GmbH - Recycling-Technik Dortmund 2017

Easyfairs Deutschland GmbH - Recycling-Technik Dortmund 2017

For the fourth time, international and national providers of recycling solutions will come together with decision makers. The trade show’s main focus is all about machinery and technical components ...

Easyfairs Deutschland GmbH - Solids Dortmund 2017

Easyfairs Deutschland GmbH - Solids Dortmund 2017

SOLIDS Dortmund 2017 is the leading trade show for powder and bulk solids technologies in Germany and will be co-located with the 4th edition of RECYCLING-TECHNIK. On display are equipment and soluti...

Easyfairs Deutschland GmbH - Logistics & Distribution 2017

Easyfairs Deutschland GmbH - Logistics & Distribution 2017

Logistics & Distribution is Switzerland’s industry event for intralogistics, distribution and e-logistics. Logistics is currently undergoing a sea change. Targeting visitor groups from manufacturing...

Easyfairs Deutschland GmbH - automation & electronics Zurich 2017

Easyfairs Deutschland GmbH - automation & electronics Zurich 2017

Switzerland's trade fair for industry and science mixes Bussiness, Knowhow, Innovation, Network & Entertainment in one place. Take part!

Votech Werksvertretung Deutschland - See several videos of Votech equipment on our YouTube channel

Votech Werksvertretung Deutschland - See several videos of Votech equipment on our YouTube channel

On YouTube channel you can see a number of bag filling, bag palletizers and stretchhood machines. Remark: on YouTube you see just a limited number of the portfolio of machines from Votech BV. Ask o...

Votech Werksvertretung Deutschland - Stretchhood machine and pallet wrapping systems

Votech Werksvertretung Deutschland - Stretchhood machine and pallet wrapping systems

Stretchhood machines for: • For 1200 x 800 and 1200 x 1000mm pallets • For 1200 x800 + 600 x 800 mm (Double rolls) • Build according to customer specification ( custom made/special models Vote...

HIWAY S.r.l. Società Unipersonale - Conveyng for bulk materials and powders

HIWAY S.r.l. Società Unipersonale - Conveyng for bulk materials and powders

HiWay was founded at the end of the ‘50 as a conveyng producer company for bulk materials and powders. By continued development in design and manufacture, both in laboratory and in real working cond...

HIWAY S.r.l. Società Unipersonale - Aero-Mechanical Conveyors

HIWAY S.r.l. Società Unipersonale - Aero-Mechanical Conveyors

HiWay aero-mechanical conveying systems are designed to handle a wide variety of powders, granular products and bulk material. HiWay manufacture and set up conveying and distribution systems that have...

HIWAY S.r.l. Società Unipersonale - Solutions according to your needs

HIWAY S.r.l. Società Unipersonale - Solutions according to your needs

The most innovative solution in conveying systems and distribution. HiWay’s conveying systems guarantee high performances and great versatility.

Votech Werksvertretung Deutschland - Bag palletisers

Votech Werksvertretung Deutschland - Bag palletisers

Types of palletizer based on capacity; • 250 bags/hour (all kinds of bags) with a gantry robot palletiser • 600/1200 bags/hour with a articular robot palletiser • 250-1800 bags/hour with a hig...

Frewitt fabrique de machines SA - The FreDrive-Lab with one more head "the PinMill"

Frewitt fabrique de machines SA - The FreDrive-Lab with one more head "the PinMill"

Frewitt presents the new PinMill-Lab The PinMill-Lab is a high-performance pin mill designed for pulverizing hard or crystalline products to a particle down to D90 of 10 μm. Ideal for processing sma...

Votech Werksvertretung Deutschland - Bag filling / bagging machines

Votech Werksvertretung Deutschland - Bag filling / bagging machines

Types of bag filling machines based on dosing and/or weighing system, with; • Belt dosing system; • Vibrating dosing system; • One or two net weighing units; • Gravity dosing systems; • Hori...

Kalenborn Kalprotect GmbH & Co. KG - Customer-specific solutions protect complex industrial components economically

Kalenborn Kalprotect GmbH & Co. KG - Customer-specific solutions protect complex industrial components economically

Our customer-specific solutions involve innovative wear-protection applications for complex industrial installations. These wear-protection solutions take into account all the relevant influencing fac...

Kalenborn Kalprotect GmbH & Co. KG - Wear protection for industrial systems ensures a long life time

Kalenborn Kalprotect GmbH & Co. KG - Wear protection for industrial systems ensures a long life time

Wear protection for industrial systems are tried-and-trusted systems for protecting plant components used in production of energy and raw materials, as well as in primary industries. No two problems o...

Kalenborn Kalprotect GmbH & Co. KG - Wear-resistant piping systems ensures that the production process can carry on continously

Kalenborn Kalprotect GmbH & Co. KG - Wear-resistant piping systems ensures that the production process can carry on continously

We usually line piping components, such as pipes or pipe bends, with mineral, ceramic or metal materials to make them resistant to wear. However, we also manufacture hard cast piping components. Hydr...

VEGA Grieshaber KG - Bluetooth opens up new possibilities for all plics® level and pressure transmitters from VEGA

VEGA has just brought a Bluetooth solution to the market – the first sensor manufacturer to do so. A new generation of the universal display and adjustment module PLICSCOM will allow all the transmi...

VEGA Grieshaber KG - VEGAPULS 69 – The radar level sensor for bulk solids with 80 GHz

The radar level transmitter VEGAPULS 69 operates at a frequency of 80 GHz, which allows a considerably better focusing of the transmitted signal. In containers and silos with many internal obstruction...

AUMUND Fördertechnik GmbH - Bucket Elevators

AUMUND Fördertechnik GmbH - Bucket Elevators

Reliable operation, high conveying capacities, longevity and low operational costs characterise AUMUND bucket elevators. Depending on material, application and local conditions they are configured wit...

Schenck Process Europe GmbH - MULTICOR® S

Schenck Process Europe GmbH - MULTICOR® S

Feeding of powdered materials A mass flow-rate feeding/dosing device according to the Coriolis principle MULTICOR® S mass flow-rate feeding devices are used wherever large amounts of bulk soli...

Schenck Process Europe GmbH - E-finity®

Schenck Process Europe GmbH - E-finity®

Dense phase conveying system Gentle Handling of Bulk Materials E-finity is a patented continuous dense phase convey system for fragile materials. Precise pressure monitoring and airflow corrections ...

Schenck Process Europe GmbH - LST/LSTC (large square top removal) pulse jet filters

Schenck Process Europe GmbH - LST/LSTC (large square top removal) pulse jet filters

Industrial dust collectors Schenck Process Pulse Jet Filters can be used in a wide variety of air filtration applications. There are nine different dust collectors in the Pulse Jet family of filters ...

Schenck Process Europe GmbH - ModuPlasma™

Schenck Process Europe GmbH - ModuPlasma™

Odor abatement system Safe and quick oxidation of manufacturing related odors ModuPlasma™ is an odor abatement system that uses direct treatment, which means the emission is led through the energy...

Schenck Process Europe GmbH - SacMaster

Schenck Process Europe GmbH - SacMaster

Bulk bag discharge system The SacMaster bulk bag discharge system has a modular design that provides flexible positioning to meet many process requirements. A patented agitation system allows the Sac...

Schenck Process Europe GmbH - MechaTron® Coni-Steel vibratory feeder

Schenck Process Europe GmbH - MechaTron® Coni-Steel vibratory feeder

Volumetric and gravimetric feeding with maintenance-free vibratory discharge The economical problem-solver with very special characteristics. The Coni-Steel® vibratory feeder is fitted with a mainte...

VDL Industrial Products bv - Rotary valves

VDL Industrial Products bv - Rotary valves

VDL Industrial Products has been a well-known manufacturer of "HT" rotary valves for more than 40 years. The experience and know-how gained in different fields of application, throughout these years, ...

Aerzener Maschinenfabrik - AERZEN Delta Hybrid D 98 V - Rotary Lobe Compressor Stage

Aerzener Maschinenfabrik - AERZEN Delta Hybrid D 98 V - Rotary Lobe Compressor Stage

AERZEN Delta Hybrid D 98 V, the innovative rotary lobe compressor stage with pre-inlet channel for pressure ranges from -950 to 1,500 mbar With -950 mbar very close to the vacuum. For a decisive plus ...

Scrapetec-Trading GmbH - SpeedScrape - The Secondary Belt Cleaner

Scrapetec-Trading GmbH - SpeedScrape - The Secondary Belt Cleaner

SpeedScrape is a patented product made by ScrapeTec Trading GmbH in Germany. The secondary scraper is characterized by its innovative design, based on springsupported, inclined scraping blades. The sp...

Scrapetec-Trading GmbH - DustScrape - The Dust Emission Prevention System

Scrapetec-Trading GmbH - DustScrape - The Dust Emission Prevention System

Installed above the conveyor belt, the filtering cloth retains dust particles created by conveyed material, while remaining permeable to circulating air. The filter cloth is specifi cally designed to ...

Scrapetec-Trading GmbH - AirScrape - The Contact Free Conveyor Belt Skirting

Scrapetec-Trading GmbH - AirScrape - The Contact Free Conveyor Belt Skirting

AirScrape is a newly patented German designed and manufactured conveyor belt skirting system which hovers freely above the conveyor belt, eliminating skirt friction & belt damage. It’s unique array ...

JACOB Rohrsysteme - Wear protection and non-stick protection

JACOB Rohrsysteme - Wear protection and non-stick protection

Whether for grain, recycled granulate, silica sand or other particularly a brasive bulk goods, or for the extraction of air containing extremely abrasive particles – we can provide you with the opti...

Schreier Maschinen- Und Apparatebau GmbH - Screw-type dosing machines and screw conveyors

Schreier Maschinen- Und Apparatebau GmbH - Screw-type dosing machines and screw conveyors

Accurate addition, dispensing, filling, weighing and dosing – the type of bulk material and application are the keys to determining the design, mechanism, capacity and other performance characterist...

Ambros Schmelzer & Sohn GmbH & Co. KG - Pipework Systems

Ambros Schmelzer & Sohn GmbH & Co. KG - Pipework Systems

The name Schmelzer stands for perfected products which have been proved in plants since many years. Our pipework system with precise flanged edge is especially made for the transport of grain and vari...

Votech Werksvertretung Deutschland - Votech BV

Votech Werksvertretung Deutschland - Votech BV

Votech B.V. View On TECHnique Votech BV has a team of highly motivated, all-round technicians. Employees with a passion for technique. Votech was founded by 3 partners who have together more than 75 ...

VST Engineering, spol. s.r.o. - Extinguishing Barrier

The ANTIDET Barrier is an extinguishing barrier for separating the explosion and serves to extinguish an explosion flame that spreads through pipelines from one facility into another, by actively inte...

SIMONA AG - SIMONA® Superlining sheets

SIMONA AG - SIMONA® Superlining sheets

SIMONA® Superlining - Lining Plastics for the Bulk Materials Industry SIMONA high-performance plastic sheets have been designed to meet the full range of materialflow, friction and wear challenges a...

SIMONA AG - SIMONA® AP-Line Pipes and Fittings

SIMONA AG - SIMONA® AP-Line Pipes and Fittings

SIMONA® AP-Line - Pipes and fittings for transporting solids Pipe interiors are subjected to significant mechanical loads during hydraulic transport of solids such as sand, coal sludge or ores and p...

Schreier Maschinen- Und Apparatebau GmbH - Filling station for different batch types and batch sizes

Schreier Maschinen- Und Apparatebau GmbH - Filling station for different batch types and batch sizes

- fully automatic control - telescopic tube for setting hight (pneumatically, electrically, hydraulically) - annualr extraction in filling head - multi-application weighing with easy to change weighin...

HAVER & BOECKER OHG - Haver Niagara GmbH: Screening - Washing - Pelletizing

HAVER & BOECKER OHG - Haver Niagara GmbH: Screening - Washing - Pelletizing

HAVER NIAGARA GmbH is a processing specialist in the machine construction and engineering industry for primary and secondary raw materials of the mining, industrial mineral, recycling and building mat...

Janner Waagen GmbH - Big-Bag scales

Janner Waagen GmbH - Big-Bag scales

Individually configurable Our modular system allows you to accurately put together the big-bag system "tailor-made" to suit you and your needs. We combine the right platform size with the necessary we...

Janner Waagen GmbH - Band scales

Janner Waagen GmbH - Band scales

Each belt scale is planned individually according to your needs, constructed and installed on existing conveyors. We combine the belt scale with the necessary weighing range (5-4000 t / h, accuracy 0....

Zeppelin Systems - BLOWTHROUGH ROTARY FEEDER D, series II

Zeppelin Systems - BLOWTHROUGH ROTARY FEEDER D, series II

The blowthrough rotary feeder is used for feeding powdered products into pneumatic suction and pressure conveying systems with differential pressures up to 1.0 bar (g).

Zeppelin Systems - DIVERTER VALVE TST

Zeppelin Systems - DIVERTER VALVE TST

The diverter valve TST is used for filling several silos and bins from one common pneumatic conveying line. It is mounted directly on the corresponding filling nozzle without any intermediate bend. lt...

Schenck Process Europe GmbH - CONiQ®

Schenck Process Europe GmbH - CONiQ®

Condition monitoring for screening machines and vibrating feeders Continuous condition monitoring to protect machine components By continually monitoring the condition of various parameters, for exam...

Steute Schaltgeräte GmbH & Co. KG - Ex magnetic sensor withstands temperatures of down to -60°C

Steute Schaltgeräte GmbH & Co. KG - Ex magnetic sensor withstands temperatures of down to -60°C

Especially in subzero applications, many users prefer non-contact sensors because, unlike electromechanical switchgear such as position switches, they do not run the danger of malfunctioning due to fr...

Steute Schaltgeräte GmbH & Co. KG - Ex position switch Ex 99 for temperatures down to-60 °C - big standard switch

Steute Schaltgeräte GmbH & Co. KG - Ex position switch Ex 99 for temperatures down to-60 °C - big standard switch

With the Ex 99, the steute business unit "Extreme" will be presenting a new series of position switches developed especially for "Extreme" applications and conforming to DIN EN 50041 dimensions. "Ext...

Steute Schaltgeräte GmbH & Co. KG - Ex position switches Ex 97 for temperatures down to -60 °C - small standard switch

Steute Schaltgeräte GmbH & Co. KG - Ex position switches Ex 97 for temperatures down to -60 °C - small standard switch

The steute business unit "Extreme" has developed the position switches in its Ex 97 series for precisely this requirement profile. These position switches, with dimensions to DIN EN 50047, have been ...

MeWa Waagenservice und Getreidetechnik GmbH - Conveyor Belt Scale

MeWa Waagenservice und Getreidetechnik GmbH - Conveyor Belt Scale

Integration of application-specific weighing solutions into conveyor belts requires special qualifications. Customised solutions, certain know-how and suitable data management systems enable continuou...

Dunlop Conveyor Belting - DUNLOP ULTIMA

Dunlop Conveyor Belting - DUNLOP ULTIMA

Designed and developed strictly in accordance with DIN 7715 international standards by the Dunlop Research & Development team in Holland, Dunlop Ultima is available in 60º Shore A and 40º Shore A in...

Dunlop Conveyor Belting - Usflex conveyor belts

Dunlop Conveyor Belting - Usflex conveyor belts

The major advantage of UsFlex is its extremely strong 'straight-warp' construction giving it superior impact, rip and tear resistance and first class operational performance and extended lifespan. Thi...

Dunlop Conveyor Belting - DUNLOP STEELCORD BELTING

Dunlop Conveyor Belting - DUNLOP STEELCORD BELTING

The worldwide Fenner Dunlop Group has more than 40 years of experience in producing top quality steel cord belting. Benefits for your business: Excellent wear resistance – longer operational lifet...

Magdalena KITZMANN GmbH - Combined big bag and sack loading station

Magdalena KITZMANN GmbH - Combined big bag and sack loading station

Combined big bag and sack loading station. If required, design options with pneumatic walk device for roughly granulated raw materials, which can lead to clumping. Storage tank with flange for aspirat...

Magdalena KITZMANN GmbH - Clump disintegrator

Magdalena KITZMANN GmbH - Clump disintegrator

Clump disintegrator KIKBV from KITZMANN. For all bulk materials that tend to form clumps. Designed as a single-shaft disintegrator with crushing force of 3x200kg. Dimensions within 300x500 mm. Stainl...

Magdalena KITZMANN GmbH - Small component scale flexible

Magdalena KITZMANN GmbH - Small component scale flexible

Small component scales type: KKW from KITZMANN. Ideal for raw materials that tend to adhere. True to the motto “what good is the best dosing if the output can’t be ensured?” Various designs avai...

Magdalena KITZMANN GmbH - Emptying Big Bags without the dust

Magdalena KITZMANN GmbH - Emptying Big Bags without the dust

Emptying Big Bags without the dust The innovative emptying function for Kitzmann Group big bag loading stations effectively reduces the occurrence of dust. Big bags are carried in a secure process, ...

RATAJ a.s. - Dosing device

RATAJ a.s. - Dosing device

For exact dosing of loose material, we are using our dosing system which is consist from hooper of dosing device, shaftless screw conveyor and bridge breaker. Conveyor and bridge breaker has separated...

ERDWICH Zerkleinerungssysteme - Hammermill HA 800

ERDWICH Zerkleinerungssysteme - Hammermill HA 800

The champions for hard and brittle materials! ERDWICH hammer mills are the answer to the challenge of selectively shredding hard and brittle materials. Then again, ERDWICH hammer mills also take the ...

ERDWICH Zerkleinerungssysteme - Cardboard shredder EKZ | FKZ

ERDWICH Zerkleinerungssysteme - Cardboard shredder EKZ | FKZ

Economical solutions for shredding and processing! Reducing transportation costs, compressing material for feeding to existing pressed-waste containers or baling presses, or shredding of material for...

RATAJ a.s. - Big - Bag stations

RATAJ a.s. - Big - Bag stations

RATAJ company is also interesting in production of Big-Bag stations - emptying and filling. Our Big-Bag stations are produced according to requirements of our customers (also like conveyors). Also w...

TechnicGum Polymeres - Star Tracker PUR

TechnicGum Polymeres - Star Tracker PUR

The STAR tracker © can also be tted upside down at the interior of the belt and thus align conveyor belts with cleats. The STAR tracker © can be engaged in numerous situations. Trough it's symmetri...

TechnicGum Polymeres - RacloFlex SW

TechnicGum Polymeres - RacloFlex SW

From 2014, our range of RacloFlex scrapers will be renewed with the coming of our RacloFlex SW : the reference for return side cleaning. Its blade has two internal levers which transform the outside l...

Lutze Fördertechnik - Conveyor Accessories

Lutze Fördertechnik - Conveyor Accessories

Rollers and drums Lutze Conveying offers solutions for various usage conditions: OB/UB- idlers Task-roller pads Support ring rolls Special rolls G...

FTK Förderband Technik Kilian GmbH - Flyer FTK Förderband Technik Kilian GmbH

FTK Förderband Technik Kilian GmbH - Flyer FTK Förderband Technik Kilian GmbH

New Flyer FTK Förderbandtechnik Kilian GmbH english

DS Schüttguttechnik GmbH - Components for plant engineering

DS Schüttguttechnik GmbH - Components for plant engineering

For customized complete solutions, we offer further components for plant engineering in our product portfolio, eg. Big Bag filling machines, Big Bag emptying machines, bag pick-up stations and pneumat...

DS Schüttguttechnik GmbH - Palletising and stretch wrapping machines

DS Schüttguttechnik GmbH - Palletising and stretch wrapping machines

The use of high-performance palletising systems makes an optimal process automation possible. Palletising machines of the PP series are equipped with an automatic computer software, which makes an aut...

Huning Anlagenbau GmbH & Co. KG - Impact Crusher HPZ 1200 and 900

Huning Anlagenbau GmbH & Co. KG - Impact Crusher HPZ 1200 and 900

The Impact Crusher HPZ 900 is used to crush organic wastes and high-wear substrates with a high mineral content. Depending on the overall process, it can be operated both for individual batches or con...

Huning Anlagenbau GmbH & Co. KG - Crusher Separator

Huning Anlagenbau GmbH & Co. KG - Crusher Separator

Out-of-date food is a particular challenge for plant operators because of the high proportion of packaging. The HTZ Crusher Separator crushes the organic matter and separates the packaging material in...

HECHT Technologie GmbH - Containment drum discharging station with suction lance CFE-L

HECHT Technologie GmbH - Containment drum discharging station with suction lance CFE-L

The Containment drum discharging station CFE-L is an innovative possibility to discharge drums dust- and contamination free. The drum is positioned under the isolator by the automatic lifting device a...

MEHRTEC GmbH - 3D - Einbausimulation

Wenn besonders wenig Bauraum für Anlagenbestandteile wie Behälter, Filter oder Rohrleitungen vorhanden ist, sind wir in der Lage mit einem 3D-LaserScann die Realität virtuelle abzubilden. IN der vi...

FTK Förderband Technik Kilian GmbH - Förderband-Abdeckhaube

FTK Förderband Technik Kilian GmbH - Förderband-Abdeckhaube

Abdeckhaube mit hilfe von Spannbändern leicht von beiden Seiten zu öffnen.

FTK Förderband Technik Kilian GmbH - Bürstenabstreifer

FTK Förderband Technik Kilian GmbH - Bürstenabstreifer

Bürstenabstreifer für verschiedenste Bandbreiten mit Spindelverlagerung

FTK Förderband Technik Kilian GmbH - Impact-Absorber-Station

FTK Förderband Technik Kilian GmbH - Impact-Absorber-Station

Impact absorber station The implementation of impact absorber stations provides effective protection against damage to the conveyor belt in the loading area. The belt is often pierced by sharp, large ...

FTK Förderband Technik Kilian GmbH - Makierungsschilder für Reißleine

FTK Förderband Technik Kilian GmbH - Makierungsschilder für Reißleine

Makierungsschild für Reißleine 40x70, 1v Rolle 50 Stück

FTK Förderband Technik Kilian GmbH - Augenschraube

FTK Förderband Technik Kilian GmbH - Augenschraube

Augenschraube zur Führung der Reißleine

FTK Förderband Technik Kilian GmbH - Ankerhaken

FTK Förderband Technik Kilian GmbH - Ankerhaken

Ankerhaken zur Führung der Reißleine

FTK Förderband Technik Kilian GmbH - Reißleine Rot

FTK Förderband Technik Kilian GmbH - Reißleine Rot

Reißleine Stahlseil verzinkt PVC-Umantelt Rot

FTK Förderband Technik Kilian GmbH - Spannfeder

FTK Förderband Technik Kilian GmbH - Spannfeder

Spannfeder in verschiedenen Ausführungen

FTK Förderband Technik Kilian GmbH - Spannschloß für Reißleine

FTK Förderband Technik Kilian GmbH - Spannschloß für Reißleine

Spannschloß für Reißleine M6; 2 Ösen verzinkt M6; 1 Haken / 1 Öse verzinkt M6; 1 Haken / 1 Öse Edelstahl

FTK Förderband Technik Kilian GmbH - Zubhör für Seilzugnotschalter

FTK Förderband Technik Kilian GmbH - Zubhör für Seilzugnotschalter

Bauteile für Reißleinen-System Reißleinen werden als Stellglieder für die Betätigung von Seilzugnotschaltern entlang von Förderbandanlagen eingesetzt. Die Reißleine und das für die Installatio...

FTK Förderband Technik Kilian GmbH - Schieflaufschalter

FTK Förderband Technik Kilian GmbH - Schieflaufschalter

Schieflaufschalter Förderbänder können aus Ihrer vorgesehenen Spur laufen und dadurch große Schäden verursachen. Schieflaufschalter werden deshalb zur Erkennung von Bandschieflauf und zur Banda...

FTK Förderband Technik Kilian GmbH - Seilzugnotschalter

FTK Förderband Technik Kilian GmbH - Seilzugnotschalter

Seilzugnotschalter Förderbandanlagen müssen entlang der Förderstrecke bei Notfällen abgeschaltet werden können. Daher sind Seilzugnotschalter als ergänzende Schutzmaßnahme durch Normen vorgesc...

FTK Förderband Technik Kilian GmbH - Drehzahlüberwachung

FTK Förderband Technik Kilian GmbH - Drehzahlüberwachung

Drehzahlüberwachung Wichtiger Prozessparameter zur Steuerung und Kontrolle von Förderbändern ist die Förderbandgeschwindigkeit. Das Produktprogramm der Drehzahlüberwachung umfasst Geräte für d...

FTK Förderband Technik Kilian GmbH - Sicherheitseinrichtungen am Förderband

FTK Förderband Technik Kilian GmbH - Sicherheitseinrichtungen am Förderband

FTK Förderband Technik Kilian GmbH Produkte werden weltweit zur Überwachung von Förderbandanlagen und Becherwerken für Schüttgüter eingesetzt. Das Produktprogramm wurde für die rauen Einsatzbed...

FTK Förderband Technik Kilian GmbH - Gurtwendestation aus PU

FTK Förderband Technik Kilian GmbH - Gurtwendestation aus PU

FTK-TURN Gurtwendestation Das Transportieren von Schüttgütern über lange Strecken wird vor allem in der Steine-, Erden-lndustrie, im Mining und in der Braunkohle oftmals mit dem Einsatz von Gurtfö...

FTK Förderband Technik Kilian GmbH - PU-T-Bar

FTK Förderband Technik Kilian GmbH - PU-T-Bar

PU-T-Bar FTK Förderband Technik Kilian GmbH T-bar scrapers are made of highly wear-resistant polyurethane and are ideal for demanding applications in bulk, recycling and treatment technology. When t...

FTK Förderband Technik Kilian GmbH - Elevator belt

FTK Förderband Technik Kilian GmbH - Elevator belt

Elevatorgurte FTK Förderband Technik Kilian GmbH hat eine breite Palette von Elevatorgurte für alle Anwendungen. Das Sortiment umfasst die folgenden Gurttypen: antistatisch, abriebfest, Hochtempera...

FTK Förderband Technik Kilian GmbH - elevator bolts

FTK Förderband Technik Kilian GmbH - elevator bolts

Elevatorschrauben FTK Förderband Technik Kilian GmbH liefert alle bekannten Typen von Elevatorbecherschrauben - Tellerschrauben nach DIN15237, Ref 70, Fang und Easyfit werden in Produktionsstätte i...

FTK Förderband Technik Kilian GmbH - Elevator belting fasterners

FTK Förderband Technik Kilian GmbH - Elevator belting fasterners

Elevatorgurtverbinder FTK Förderband Technik Kilian GmbH bietet eine Reihe von mechanischen Gurtverbindern für den Einsatz auf den meisten PVC-, Gummi- und Stahl-Elevatorgurten. z. B. Supergrip Gu...

FTK Förderband Technik Kilian GmbH - Gummi-Stützringe Typ B

FTK Förderband Technik Kilian GmbH - Gummi-Stützringe Typ B

Stützringe für Tragrollen Typ-B Mit Stützringen des B-Typs ausgestattete Tragrollen werden als Untergurtrollen eingesetzt. Sie sind zumeist am Tragrollenende platziert. Die Stützringe (Gummiringe...

FTK Förderband Technik Kilian GmbH - Gummi-Stützringe TypA

FTK Förderband Technik Kilian GmbH - Gummi-Stützringe TypA

Stützringe für Tragrollen Typ-A Stützringe vom A-Typ verhindern ein Verkrusten und Aufbauen von Schmutz auf den Tragrollen und gewährleisten einen geraden Lauf im Untertrum. Die Stützringe (Gum...

FTK Förderband Technik Kilian GmbH - Spiralringe

FTK Förderband Technik Kilian GmbH - Spiralringe

Spiralring für die Fördergurtreinigung Spiralringe werden auf Standardtragrollen aufgezogen zur Reinigung von Fördergurten eingesetzt. Beim Drehen der Tragrolle befördern die Spiralringe durch tau...

FTK Förderband Technik Kilian GmbH - Pufferringe

FTK Förderband Technik Kilian GmbH - Pufferringe

Pufferringe für Tragrollen – Typ C Pufferringe fangen die Fallenergie des Fördergutes auf und schützen so den Gurt vor Beschädigungen. Die Pufferringe (Gummiringe) von FTK Förderband Technik Ki...

FTK Förderband Technik Kilian GmbH - Stützscheiben

FTK Förderband Technik Kilian GmbH - Stützscheiben

Stützscheiben für Tragrollen Stützscheiben auf Tragrollen überbrücken größere Distanzen zum Fördergurt. Sie Stützen den Gurt und werden vorzugsweise bei Wellenkantengurten oder profilierten F...

FTK Förderband Technik Kilian GmbH - Elevator Becher

FTK Förderband Technik Kilian GmbH - Elevator Becher

FTK Förderband Technik Kilian GmbH hat das zweitgrößte Sortiment an Elevatorbecher. Mit über 400 verschiedenen Bechertypen und -Größen hat 4B einen Becher für jedes Produkt und jede Anwendung. ...

FTK Förderband Technik Kilian GmbH - PU-Stützringe Typ A

FTK Förderband Technik Kilian GmbH - PU-Stützringe Typ A

Polyurethan Ringe Polyurethan ist aufgrund seiner Abriebfestigkeit und Langlebigkeit für den Einsatz in der Förderindustrie gut geeignet. Stützringe für Tragrollen aus Polyurethan zeichnen sich du...

FTK Förderband Technik Kilian GmbH - PU-Stützringe Typ B

FTK Förderband Technik Kilian GmbH - PU-Stützringe Typ B

Polyurethan Ringe Polyurethan ist aufgrund seiner Abriebfestigkeit und Langlebigkeit für den Einsatz in der Förderindustrie gut geeignet. Stützringe für Tragrollen aus Polyurethan zeichnen sich du...

GUIDETTI S.R.L. - SINCRO315MILL

GUIDETTI S.R.L. - SINCRO315MILL

This range of granulators is designed to process any type of cable, electric, electronic, rigid or flexible and to separate copper and/or aluminum from the insulating material, provided it is free fro...

AVITEQ Vibrationstechnik GmbH - Dewatering screen

AVITEQ Vibrationstechnik GmbH - Dewatering screen

AViTEQ Dewatering screens are designed as linear vibrating devises for drainage of sand, plastic granules, kieserite, limestone, etc., even to depart insoluble contaminants from wash water or carrier ...

AVITEQ Vibrationstechnik GmbH - Circular motion screen

AVITEQ Vibrationstechnik GmbH - Circular motion screen

AViTEQ-Vibrating Circular motion screens divide into several bulk grain size ranges, seven small amounts of over-or undersize or separate from impurities and foreign matter from the screenings. Vibrat...

MLT Minet Lacing Technology GmbH - Cleats hot vulcanization

MLT Minet Lacing Technology GmbH - Cleats hot vulcanization

We vulcanize cleats with the same rubber quality as the belt (abrasive, oil & grease resistant). These cleats, which work under very high constraints, are stronger than if set with adhesive. We have ...

MLT Minet Lacing Technology GmbH - Heat vulcanizing of rubber covering

MLT Minet Lacing Technology GmbH - Heat vulcanizing of rubber covering

We vulcanize some standard belts with raw rubbers (from 40 to 80 shA), giving them special shapes. More resistant than with adhesive, our belts are perfect for extreme applications. Better resistanc...

MLT Minet Lacing Technology GmbH - Various belt

MLT Minet Lacing Technology GmbH - Various belt

MLT is specialized in Technical Special belts. It is impossible to list the whole range of belt we can manufacture because we study each inquiry. Find below some examples of belts we manufacture in ou...

MLT Minet Lacing Technology GmbH - FDA/USDA belts

MLT Minet Lacing Technology GmbH - FDA/USDA belts

As defined by their name, these belts are used in food-processing and pharmaceutical industries. Our belts are perfect for extreme applications : deboner belts, juice, soup producing machines... All...

MLT Minet Lacing Technology GmbH - Power transmission belts

MLT Minet Lacing Technology GmbH - Power transmission belts

Our power transmission belts are flat, with Rayon or Aramid carcass. They run up to 60 m/s on very small roll diameters. They are used for transmission, but also as tube winding belts. High breaking...

MLT Minet Lacing Technology GmbH - Sandblasting / Tumblasting belts

MLT Minet Lacing Technology GmbH - Sandblasting / Tumblasting belts

These belts are used in tumblasting machine to clean foundry pieces after furnace unload. In order to resist to these constraints, our belts are manufactured with a very high resistant rubber (abrasi...

MLT Minet Lacing Technology GmbH - Cable drawing belts

MLT Minet Lacing Technology GmbH - Cable drawing belts

Cable drawing belts are used in caterpillar or capstan machines after cable extrusion. Our cable drawing belts are manufactured on demand, with high strength up to 2 500 N/mm. They are used by cable, ...

MLT Minet Lacing Technology GmbH - Thrower belts

MLT Minet Lacing Technology GmbH - Thrower belts

Thrower/Slinger belts run under very high speeds (from 10 to 20 m/s), under inflexion rollers & very harsh conditions. A belt vulcanized by heat performs less efficently ! Our belts are manufactured ...

MLT Minet Lacing Technology GmbH - Water-bag vulcanising press

MLT Minet Lacing Technology GmbH - Water-bag vulcanising press

APPLICATIONS: Vulcanising and repair of heavy duty rubber belts. This press is particularly designed to realize vulcanised joints on solid-woven or metalcord belts. also efective on worn out belt. S...

MLT Minet Lacing Technology GmbH - Bolt plate fasteners - Rip repair fasteners and patch

MLT Minet Lacing Technology GmbH - Bolt plate fasteners - Rip repair fasteners and patch

Minet Lacing Technology bolt plate fasteners allows for simple and easily fixing or joining conveyor belt. Fast to install No expensive iinstallation tools necessary Steel quality: Carbon steel or ...

MLT Minet Lacing Technology GmbH - 6 points fasteners - Rip repair fasteners and patch

MLT Minet Lacing Technology GmbH - 6 points fasteners - Rip repair fasteners and patch

Minet Lacing Technology 6 points fasteners allow to easily fix conveyor belt. The end of the fastener is very sharp. It can be used for conveyor belt rips or pulling on belts to the conveyor. Tear / ...

MLT Minet Lacing Technology GmbH - Multipoints

MLT Minet Lacing Technology GmbH - Multipoints

MLT Minet Lacing Technology Multipoint fasteners allow to easily fix conveyor belts. It can be used for conveyor belt rips or pulling on belts to the conveyor. Tear or rip repair Quick fitting Easy f...

MLT Minet Lacing Technology GmbH - Fix'N Go - Rip repair fasteners and patch

MLT Minet Lacing Technology GmbH - Fix'N Go - Rip repair fasteners and patch

Fix’N Go® is an innovative and unique solution for repairing belt rips and tears. Thanks to the 50 mm3 rubber used, FIX’N GO® has a higher abrasion resistance than most of your conveyor belts us...

MLT Minet Lacing Technology GmbH - ISC - Flexible splices

MLT Minet Lacing Technology GmbH - ISC - Flexible splices

The ISC® lacing allows the belt to be installed by simply screwing both ends together without overlap or extra thickness. This system guarantees an immediate installation with less down time. ISC® l...

MLT Minet Lacing Technology GmbH - Super-Screw -Flexible splices

MLT Minet Lacing Technology GmbH - Super-Screw -Flexible splices

MLT Minet Lacing Technology has developed the SUPER-SCREW®. It is a flexible rubber lacing to screw on to the belt as an alternative to vulcanizing. MLT specific screws are self-drilling and self-tap...

MLT Minet Lacing Technology GmbH - PVC or PU lacings - flexible lacings

MLT Minet Lacing Technology GmbH - PVC or PU lacings - flexible lacings

PVC and PU flexible lacings developed by Minet MLT, are vulcanized inside the PVC or PU belt (using a vulcanizing PVC press). Available in various colours, theses lacings are perfect to join either PV...

MLT Minet Lacing Technology GmbH - Flexible steel fastener

MLT Minet Lacing Technology GmbH - Flexible steel fastener

Flexible steel fastener has continuous claws, no risk to contaminated the carried product. It is easy to install with hammer tool. Steel quality: Galvanized steel or stainless steel Installation meth...

MLT Minet Lacing Technology GmbH - Wire hook - Mechanical fasteners

MLT Minet Lacing Technology GmbH - Wire hook - Mechanical fasteners

The wire hook carded fastener joins conveyor belt with moderate tension for narrow belts. Steel quality: Galvanized steel or stainless steel Installation method: special vice tool Packaging: Standar...

MLT Minet Lacing Technology GmbH - Record V6 - Mechanical fasteners

MLT Minet Lacing Technology GmbH - Record V6 - Mechanical fasteners

RV6 fastener has pre-assemble staples. Its allows to join belts 6 to 12 mm belt thickness. RV6 is perfect for some mine applications.

MLT Minet Lacing Technology GmbH - G 2000 fasteners

MLT Minet Lacing Technology GmbH - G 2000 fasteners

Fasteners of G 2000 family are fasteners with pre-attached staples for high strength conveyor belts. G 2002/2003 is perfect for mine applications. G 2001 fastener is specific for roundbalers.

MLT Minet Lacing Technology GmbH - Titan - Mechanical fasteners

MLT Minet Lacing Technology GmbH - Titan - Mechanical fasteners

Titan fastener has pre-assembled staples for high tension conveyor belts. Steel quality: High tensile carbon steel (HLE) or stainless steel or antimagnetic stainless steel - depending of the type . ...

MLT Minet Lacing Technology GmbH - Mini Record - Mechanical Fasteners

MLT Minet Lacing Technology GmbH - Mini Record - Mechanical Fasteners

Mini Record fastener (MR) is a pre-installed staple for conveyor belt. pre-installed stapples easy to install Steel quality / Galvanized steel or stainless steel

MLT Minet Lacing Technology GmbH - Rivet fasteners

MLT Minet Lacing Technology GmbH - Rivet fasteners

The rivet fastener family is large and exhaustive. It is used to join belts from 1 to 18 mm with pulley diameters from 20 to 400 mm with no costly installation equipment.

MLT Minet Lacing Technology GmbH - MS - Mechanical fastener

MLT Minet Lacing Technology GmbH - MS - Mechanical fastener

Minet Lacing Technology MS fasteners are the only mechanical fasteners which can be installed with screws using a screwdriver (battery, electric or pneumatic tool) ! Installation is easy and simple, d...

MLT Minet Lacing Technology GmbH - Self-lock - Mechanical fastener

MLT Minet Lacing Technology GmbH - Self-lock - Mechanical fastener

Self-Lock® fastener is developed and patented by MLT. The top face clamps itself into the belt by having the claws passing underneath the bridges and closing themselves. Its efficiency and easiness ...

RETO Recyclingtechnik GmbH - Recyclingtechnik mit System

RETO Recyclingtechnik GmbH - Recyclingtechnik mit System

Unter dem eigen rechtlich geschützten Markennamen "SYSTEM REDOMA" bietet die Firma RETO RECYCLINGTECHNIK GmbH seit 1987 Maschinen und Anlagen zur Wertstoffrückgewinnung an.

MLT Minet Lacing Technology GmbH - Clip'N Lock - Mechanical fastener

MLT Minet Lacing Technology GmbH - Clip'N Lock - Mechanical fastener

Clip’N Lock® is a low profile light duty fastener. It maintains the normal pitch that ensures an excellent gripping of the claws in wide belts, with 2 additionnal features due to its design : - dou...

RETO Recyclingtechnik GmbH - Separator SE 120 - H

RETO Recyclingtechnik GmbH - Separator SE 120 - H

Der Separator SE 120 - H bietet eine hohe Reinheit des Endprodukts. Die Anlage ist selbstreinigend und können daher schnell auf andere Materialien umgestellt werden. Die Kapazität bei Kunststoff - M...

RETO Recyclingtechnik GmbH - Granulator GA 90 - 1000

RETO Recyclingtechnik GmbH - Granulator GA 90 - 1000

Der Granulator GA 90 - 1000 ist für die Granulierung von Altkabelschrott, Kunststoff, Holz, Papier und anderen weichen Materialien geeignet. In den Wertstoffrückgewinnungsanlagen mit mittlerer bis h...

RETO Recyclingtechnik GmbH - Shredder VZ 160-1560

RETO Recyclingtechnik GmbH - Shredder VZ 160-1560

Robuste Bauweise in hoher Fertigungsqualität, Maschine auf massiver Grundplatte, leichter Messer- und Siebwechsel. Kapazität: 4 t/h, Antrieb Motor 160 KW, über Keilriemen - Vorgelegewelle - Kette, ...

AVITEQ Vibrationstechnik GmbH - Loss-in weight feeder

AVITEQ Vibrationstechnik GmbH - Loss-in weight feeder

AViTEQ Loss-in-Weight Feeders are designed to ensure a continuous, gravimetric and high tolerance batch dosing of flowable bulk materials that are not hygroscopic, adhesive or interleaving features. T...

Easyfairs Deutschland GmbH - Luxury Packaging Showroom

Easyfairs Deutschland GmbH - Luxury Packaging Showroom

Meet dan pearlman, POPAI, PaperTown, Frau Tonis Parfum, Zalon by Zalando, THE POETRY OF PACKAGING

Easyfairs Deutschland GmbH - Label & Print 2017, Zurich

Easyfairs Deutschland GmbH - Label & Print 2017, Zurich

Since its successful launch, Label & Print has continued to grow and develop. Besides classic topics like print for packaging and marking technologies, the show topics have been enhanced by the inclus...

Easyfairs Deutschland GmbH - Empack 2017, Zurich

Easyfairs Deutschland GmbH - Empack 2017, Zurich

Since 2006, Empack has been a fixture in the Swiss trade show landscape. With this tenth edition, the show has become the most important industry event of the Swiss packaging sector and counts among t...

Easyfairs Deutschland GmbH - Packaging Innovations 2017, Zurich

Easyfairs Deutschland GmbH - Packaging Innovations 2017, Zurich

Packaging Innovations is all about the packaging of consumer goods and is seen as the industry reference event and showcase for inspiring, high-value and sustainable packaging, brand building and desi...

Easyfairs Deutschland GmbH - Label&Print Berlin 2017

Easyfairs Deutschland GmbH - Label&Print Berlin 2017

TOP TRENDS IN PRINTING, LABELLING AND CONVERTING The sectors printing, labelling and converting are the fastest growing sectors within the packaging industry. Label&Print offers a stage for the growin...

Easyfairs Deutschland GmbH - Packaging Innovations 2017

Easyfairs Deutschland GmbH - Packaging Innovations 2017

On 5 & 6 April 2017, the leitmotif of “Design meets Technology” will run through all three of Easyfairs’ top packaging shows: Packaging Innovations, Luxury Packaging and Label&Print. We've gathe...

Weisse & Eschrich Drahtgewerbefabriken GmbH - screen sections with hook strip

Weisse & Eschrich Drahtgewerbefabriken GmbH - screen sections with hook strip

• screen sections with hook strip for all types of vibratory screens (side tensioning & end tensioning)

Weisse & Eschrich Drahtgewerbefabriken GmbH - Wire cloth for screen printing

Weisse & Eschrich Drahtgewerbefabriken GmbH - Wire cloth for screen printing

• Wire cloth for screen printing made by stainless steel (is used in solar technology, in the glass industry, in electronics and in the production of printed circuit boards)

Weisse & Eschrich Drahtgewerbefabriken GmbH - Screen & filter cloth

Weisse & Eschrich Drahtgewerbefabriken GmbH - Screen & filter cloth

• Screen & filter cloth made by stainless steel, non-ferrous metal, steel, tin-plated & galvanized steel as well as several synthetic materials • multi-layer screening discs and blanked sheets for...

Weisse & Eschrich Drahtgewerbefabriken GmbH - Crimped screens/lead frames/ welded mesh

Weisse & Eschrich Drahtgewerbefabriken GmbH - Crimped screens/lead frames/ welded mesh

• Crimped screens/lead frames/ welded mesh in according to DIN ISO 4783/3 (Form C/C, D/D, F/F) for several industrial purposes – e.g. Fence construction and mesh for baskets/inlets for heat treatm...

KRAUSE-Werk GmbH & Co. KG - Customised-solutions for crossovers

KRAUSE-Werk GmbH & Co. KG - Customised-solutions for crossovers

Crossovers for individual solutions based on DIN EN ISO 14122 and BGI 637 Application: e.g. to be used as mobile or stationary working area or as a crossover to pass an obstacle for example a conv...

KRAUSE-Werk GmbH & Co. KG - Customised-solutions for stationary working platforms

KRAUSE-Werk GmbH & Co. KG - Customised-solutions for stationary working platforms

Customised-solutions for stationary working platforms Stationary working platform for individual solutions based on DIN EN ISO 14122 and BGI 637 Application: e.g. to be used as maintenance an...

KRAUSE-Werk GmbH & Co. KG - Customised-solutions for mobile working platforms

KRAUSE-Werk GmbH & Co. KG - Customised-solutions for mobile working platforms

Customised-solutions for mobile working platforms Stationary working platform for individual solutions based on DIN EN ISO 14122 and BGI 637 Application: e.g. to be used as maintenance and as...

KRAUSE-Werk GmbH & Co. KG - Customised-solutions for stairs

KRAUSE-Werk GmbH & Co. KG - Customised-solutions for stairs

Customised-solutions for stairs Aluminiun stairs for individual solutions based on DIN EN ISO 14122 and BGI 637 Deliverable with or without platform Standard step width: 600 - 800 - 1000 ...

NETZSCH Trockenmahltechnik GmbH - The Best of Both Worlds - SMARTREMOVAL has revolutionized filter hose changing

NETZSCH Trockenmahltechnik GmbH - The Best of Both Worlds - SMARTREMOVAL has revolutionized filter hose changing

In the past the choice made by companies purchasing dust filter systems was in general limited by the type of plant they already had: Basically, if the height of the building made filter change possib...

NETZSCH Trockenmahltechnik GmbH - NETZSCH Fluidized Bed Jet Mill CGS

NETZSCH Trockenmahltechnik GmbH - NETZSCH Fluidized Bed Jet Mill CGS

This innovative air jet mill is capable of fine grinding all kinds of dry products with virtually no contamination. Through this specialized milling concept, product grinding is entirely autogenous. ...

Goudsmit Magnetic Systems B.V. - NEXT GENERATION MAGNETIC SEPARATORS FOR POWDERS

Goudsmit Magnetic Systems B.V. - NEXT GENERATION MAGNETIC SEPARATORS FOR POWDERS

The Goudsmit Magnetics Group of Waalre (NL) will introduce a new generation of magnetic separators at the Schüttgut in Dortmund (stand D04-4). These are used to remove metal particles (>30 µm) from ...

PROCESS SENSORS (EUROPE) LTD - MCT466-SF

Each MCT466-SF moisture gauge system consists of a stainless steel gauge and a stainless steel Operator Interface. The gauge is normally located over a conveying system and is connected by a proprieta...

Höcker Polytechnik - Hall dedusting

Höcker Polytechnik - Hall dedusting

Establishing dust-free ambient conditions is our target. Not only is this important for the health of employees, it also extends the service life of machinery and facilities. Therefore effective dedus...

Höcker Polytechnik - Shredder system dedusting

Höcker Polytechnik - Shredder system dedusting

Establishing dust-free ambient conditions is our target. Not only is this important for the health of employees, it also extends the service life of machinery and facilities. Therefore effective dedus...

Höcker Polytechnik - Climatisation for sorting cabins

Höcker Polytechnik - Climatisation for sorting cabins

Protecting the health of employees is a top priority for HÖCKER POLYTECHNIK. This is not only reflected in our own operation but also in many of our products for environmental and health protection. ...