maintenance Dortmund 2016 - Messe Westfalenhallen Dortmund, 24 - 25 February 2016

Plarad - Maschinenfabrik Wagner

Plarad - Maschinenfabrik Wagner

Stand D03

Contact details

53804 Much
Deutschland
www.plarad.de

Maschinenfabrik Wagner with its product name PLARAD is specialized in bolting technology and manufacturer of electrical, pneumatic, hydraulic and manual driven torque and tension systems. In addition, PLARAD offers a comprehensive service and maintenance program for all common bolting and drive systems.

Products

  • Plarad - Electrical Nutrunner DE1

    ◾Designed to sustain a constant load, the gearbox is now slimmer, shorter and lighter
    ◾New control system monitors and controls electrical current – therefore RPM remains constant
    ◾The DE-1 is extremely accurate as the control system compensates for current and temperature changes
    ◾Automatic sensing and switching to the appropriate electrical frequency (50-60Hz)
    ◾The multi-functional display (O-LED) is easy to use – cleverly displaying an extensive display screen
    ◾When overheating the nutrunner automatically shuts down – temperature control

    http://www.plarad.com/produkte/elektrischer-drehsc...

  • PLARAD - PSE/PSD/PST – Tensioner

    ◾Frictionless installation and disassembly from bolts/studs without exerting any torsional load on the bolt/stud
    ◾Pre-tensioning force can be precisely set
    ◾Individually adaptable to perfectly fit your specific joint/flange
    ◾Available in single-stage and multi-stage configurations
    ◾1,500 bar maximum operating pressure
    ◾Available in a variety of sizes

    http://www.plarad.com/produkte/spannzylinder.html?...

  • PLARAD - DA1 battery nutrunner

    ◾10 – 15 % more power [Nm]
    ◾5 to 25 % faster [rpm]
    ◾Most powerful nutrunner DA1-47 achieves 4,700 Nm unrivaled on the market
    ◾Up to 60 pre-selectable torque settings
    ◾Four additional powerful settings for loosening
    ◾Linear instead of progressive torque characteristic
    ◾Active 2 step battery capacity indicator
    (no inaccurate bolting connections due to low battery capacity)
    ◾On/Off switch with 0/1 operation trigger and delay circuit
    ◾Automatic release (no jamming)

    http://www.plarad.com/produkte/akku-drehschrauber....

  • PLARAD - pneumatic hydraulic power pack

    ◾Compact design
    ◾Low noise emissions
    ◾Suitable for continuous operation thanks to optimised cooling, pneumatic motor integrated in the oil tank. This prevents the motor from icing while cooling the hydraulic fluid at the same time
    ◾Suitable for construction site use: Motor secured in oil tank, completely protected by integral frame
    ◾Designed for single-hose and twin-hose applications
    ◾Use of several hydraulic torque wrenches or other hydraulic tools

    Just as their electrically powered counterparts, our pneumatically driven hydraulic power packs set themselves apart by their ruggedness and durability as well as the constant volume they output right up to their pressure limits.

    http://www.plarad.com/produkte/pneumatische-aggreg...

  • PLARAD - electric hydraulic power pack

    ◾Compact design
    ◾Low noise emissions
    ◾Optimised cooling through cooling fins and arrangement of the integrated high speed cooling
    ◾Suitable for construction site use: Motor secured in oil tank, completely protected by integral frame
    ◾Designed for single- and twin-hose applications
    ◾Use of several hydraulic torque wrenches or other hydraulic tools

    Our rugged and durable power packs are characterised by the constant volume they output right up to their pressure limits of 800 bar, and have proven themselves through their long life in the toughest applications. Ranging from standard lightweight power packs to microprocessor-controlled, fully automatic power packs to specialised power packs – Plarad offers the power pack that will fit your needs best.

    http://www.plarad.com/produkte/elektrische-aggrega...

  • PLARAD - bolt tensioner

    - Tension your bolt joints without torsion forces
    - Tension forces from 200 to 15,000 kN (44,960 to 3372,130 lb f) withstand highest pressures
    - No friction effect
    - Pre-tension and extension can be precisely set
    - With overload protection
    - Available with interchangeable insert or puller and adapter
    - One or two stage design
    - Three or four stage design on request
    - Interchangeable support tube for special customer requirements
    - SE one stage 311 up to 1960 kN (69,900 to 440,630 lb f)
    - SD two stage 1110 up to 5598 kN (249,540 to 1258,480 lb f)
    - ST multi-stage up to 15,000 kN (3372,130 lb f)

    http://www.plarad.com/produkte/spannzylinder.html?...

  • PLARAD - hydraulic torque wrench

    - Suitable for all industrial requirements
    - Housing of high-strength alloy
    - Patented high pressure safety cylinder
    - Reinforced release shock absorber
    - 360° rotatable reaction arm
    - Torque range from 210 Nm to 65,000 Nm (155 to 47,940 ft lbs)
    - Hydraulic connections up to 800 bar (11,600 psi) operating pressure
    - For hexagonal (Allen) sockets, standard and safety nuts
    - Single or dual hose design
    - Including square socket adapter with safety coupling and 360° rotatable angle
    - Safety-Hold system as option
    - Also available for use in hazardous areas for zone I (gas), according to ATEX standard.

    http://www.plarad.com/produkte/hydraulische-drehmo...

  • PLARAD - pneumatic nutrunner

    - High output
    - Easy and safe handling, vibration-free and low-noise technology
    - The ATEX-compliant models of the DP-ATEX series are suitable for use in areas subject to explosion hazards
    - Entire unit designed for heavy duty
    - Optional lateral drive and extension for use in tight spaces
    - In combination with Plarad instrumentation, the nut runner can be controlled and the nut tightening results can be documented

    http://www.plarad.com/produkte/pneumatischer-drehs...

  • PLARAD - manual torque multiplier

    XVR / XVK:
    - Torque up to 8600 Nm (6,340 fl lbs)
    - Wrench sizes from 19 to 75 mm (3/4"to 3")
    - Switchable clockwise/anti-clockwise
    - Standardised or adjustable safety support

    LTX:
    - Made of special lightweight aluminium alloy

    http://www.plarad.com/produkte/manuelle-werkzeuge....

  • PLARAD - electric nutrunner

    -High output
    - torque range from 200 to 12.000 Nm
    - Easy and safe handling, vibration-free and low-noise technology
    - Infinitely variable 360° adjustment of the drive unit
    - Automatic shutoff and electronic torque pre-select with 99-step fine adjustment
    - Suitable for continuous operation in assembly, maintenance and production
    - Entire unit designed for heavy duty
    - Optional lateral drive and extension for use in tight spaces

    http://www.plarad.com/produkte/elektrischer-drehsc...

Contact Plarad - Maschinenfabrik Wagner now!

Content is provided by exhibitors. If you consider any content inappropriate or misleading, please contact info@easyfairs.com