SCHÜTTGUT2011

Beschreibung Diese Entleereinheit ist aus den folgenden Komponenten zusammengesetzt: • Aufgabetisch • Rahmen aus Edelstahl • Entleerklemme • Auslauf-Streckvorrichtung • Spezielle elas...
Read more

SEE FLYER
Read more

Read more

The VMP series is available in nominal diameters DN010 to DN050. The VMP series has a three-part plastic body, a fibre-reinforced pinch sleeve and two plastic coupling sleeve covers. The following pla...
Read more

Read more

Read more

Nitric rubber based Resistant to oil and grease, operating in such Matter containing conditions Working temperature to 900 C Resistant to acid, aliphatic and aromatic hydrocarbons Electrostatic conduc...
Read more

Breaking strength (kg/cm2) ≥150 Breaking stretch (%) ≥350 Abrasion rating (mm3) ≤250 Rigidity (A) 65±5 EPDM based Used for conveying hot materials For a material temperature to 400�...
Read more

The major components of the Sweeping Auger are rotating internal cone with a screw mounted to as well as the stationary lower part with two outlets, which is integrated into the stationary silo bottom...
Read more

The bulk material is normally fed into the conveyor through a top inlet from where it drops through the upper run of the conveying chain down to the bottom of the conveyor. There, the bulk material is...
Read more

The bulk material is delivered by a truckand tipped into the reception area of the unloading station. As the conveyor aprons with beltmove forward, the bulk material hill is conveyed on the upper run ...
Read more

By rotation of the discharge wheel the bulk material is conveyed from the outer areas of the bunkershelf through the slot plates to the central outlet slot where it drops onto the downstream conveyin...
Read more

The discharge wheel is transporting the bulk material under the internal cone. From there it slides down the outlet chute to the central outlet opening. After reaching the outlet opening, further tran...
Read more

The major components of the BinEX are free rotating internal cone, silo bottom, discharge arm and drive integrally mounted in the bin or silo. The silo bottom has a central outlet opening which is ...
Read more

Read more

Read more

Stütz- und Pufferringe aus PU sind gegenüber Gummiringen um ein Vielfaches verschleißfester. Wir können komplett bestückte Rollen nach Ihren Angaben, aber auch lose Ringe liefern.
Read more

Belle Banne Abstreifsysteme für alle Einsatzzwecke
Read more

MFH-6 • MFH-15 • HammerWitt-Lab 1 cm – 50 mu / up to 5000 kg/h •Hammermill used for the fine crushing and pulverisation of hard, crystalline and fibrous products •The HammerWitt-...
Read more

Tracking rollers
Read more

Read more

EIPA wearplates, manufactured using tht Filler Wire Plus process, are TÜV-certified as meeting all the requirements of current quality assurance standards and we are proud to count them as one of our...
Read more

Read more

Read more

Read more

The INFA-JET pocket filter system is designed for continuous dedusting of machines and workplaces. Dust or powder products can be extracted from both exhaust air and also process gases. The modules ...
Read more

As an alternative to MKR, the INFA-MICRON cartridge filter range is a complete range for the filtration of dusts and suspended matters that are respirable, hazardous to health or toxic. Due to the mod...
Read more

The INFA-JETRON AJP is a fully automatic working ventilation filter for dust extraction of exhaust air from silos or containers. Other than its namesake INFA-JETRON Type AJB, a fan can be fixed at the...
Read more

Flexible and Residue-free. Our loading systems allow for optimum loading depending on the dome covers of the vehicles or containers to be loaded: Trucks (silo / platform trucks) Railway cars (sil...
Read more

Safety in Planning and Implementation. From the analysis of conveying requirements to the development of appropriate concepts, we offer engineering services for pipeline construction as well as compl...
Read more

Exact and Reliable. For highly complex products, we offer a selection of tailored discharge systems: Pneumatic systems with cone venting Vibration bin dischargers with unbalance motor Silo disc...
Read more

Read more

Read more

Read more

Read more

Read more

Read more

Read more

Tragrollen und Trommeln für Schütt- und Stückgut aus dem Hause SANDVIK
Read more

Gummi- und PVC Transportbänder für alle Arten von Schütt- und Stückgut
Read more

The positive displacement blower type GM is suitable for oil-free conveying of air and neutral gases. Intake volume flow approx. 30 to 65.000 m³/h. Size: 22
Read more

Blower hire unit BVO All the advantages of the world’s leading blower units – including after sales service – are available anytime and anywhere. Rent our high-quality roots blower hire units a...
Read more

Aerzener After Sales Service Aerzen after-sales service offers the entire scope of services - including maintenance contract, repairs and modernization of existing units.
Read more

The Capanivo CN 4000 is a precise and reliable capacitive limit detection. Constant even in varying material properties. Certified for hazardous sites for all solids applications with variable includi...
Read more

The challenge was an animal feed plant in Russia, required a reliable, maintenance free and economically priced content measurement for many of their storage silos (raw materials and granular). They w...
Read more

The level measurement specialist UWT, Germany has presented its popular plumb bob range at POWTECH 2008 with the addition of the reengineered model, Nivobob 3000. Despite the number of modern alternat...
Read more

Read more

Software solution for digital plant design
Read more

Where the power of man is is not enough to take loads to move, to lift and position on the use of drum handling equipment necessary. In addition to our stainless steel drum range, we can now also p...
Read more

Mobile container and drum interior cleaning system with integrated circulating pump Proven technology with maximum cost-effectiveness! SIMOFLEX® AC · For cleaning the interiors of containers with...
Read more

Ideal for the closed transport of toxic media within a plant, e.g. from the weighing room to the reacotr, with product transport that is guaranteed emission-free
Read more

Profit from our expertise and many years´experience . Materials, liquids, etc. are transported , as well as stored safely and sterilely in BOLZ INTEC pressure vessels.
Read more

Safe, dust-free and dosed emptying of drums. Conical and asymmetrical drunm funnels, optionally available in rolled bright steel /2B, ground or with electropolished surface..
Read more

Whether powders or granulates, pastes or liquids: you can store and transport any substance in a BOLZ INTEC stainles steel drum. All drums can be supplied in both individual and serial production.
Read more

The maintenance free level indicators of the VF-series are suitable for level control applications with dusty, powdery, or fine granulated bulk material with low density. These measuring devices are t...
Read more

The maintenance free level indicators of the PF-series are suitable for level control applications with dusty, powdery, or granulated bulk material that form an angle of repose during filling. These m...
Read more

The maintenance free level indicators of the MF-series are an appropriate alternative for level control applications with dusty, powdery, or granulated bulk material. They are perfect suitable as jam ...
Read more

The pinch valves of the QV-series are the ideal solution for the shutting off, distributing, and dosing of powdery and grained bulk goods; viscous, soiled, and aggressive liquids; gases and mixtures. ...
Read more

In addition to different types of the quick couplings system “Storz”, we also provide you with intelligent coupling systems for industrial hose that are used in all industries. These are equipped ...
Read more

The maintenance free pressure indicators of the MSD-range are used to protect silos and containers from to high pressure during the pneumatic filling process. As soon as the pressure reaches the switc...
Read more

The maintenance free level indicators of the DF-series are the best choice for all level control applications in bulk solids. It doesn't matter whether it is dusty, powdery, or granulated bulk materia...
Read more

Read more

For discharging and dosing of bulk goods from silos or supply hoppers. Can be used in dust explosion-endangered systems by means of inlet/outlet-mounted shut-off valves with flameproof and pressu...
Read more

Our valves impress around the world with their reliability and excellent price-performance ratio. The gate valves, butterfly valves, non-return valves, bulk good flaps, explosion protection products a...
Read more

Read more

Read more

Read more

Airconveyors International BV specializes in the desgn, manufacture and installation of conveyorsystems in all branches of industy where bulk materials are handled. Since its establishment Airconveyor...
Read more

Read more

Read more

Read more

Read more

Read more

Our Silos made of high-tech fabrics are used for bulk materials, such as: plastics (polystyrene, Aerosil, ABS, PET, etc.), RC products (EPS, EPDM, PP, PVC, etc., Special construction materials (minera...
Read more

Ultrasonic Level Gauge for solids: Level measurement during processing and storage of solids • Level indication of solids in silos and hoppers • Level measurement in stone crushes • Profile meas...
Read more

Vibration Level Switches for solids
Read more

Read more

Non-contact FMCW radar level measuring device OPTIWAVE 6300 C features a special drop antenna made of plastic (PP or PTFE), making the device virtually maintenance-free and making the antenna washing ...
Read more

When taking samples of bulk material or powders, the usual known techniques are problematic in that over time the fines penetrate the bearings and ultimately causes inevitable blockage. Additionally t...
Read more

The Big Screen! Dieser Begriff bekommt derzeit eine neue Bedeutung. Das Schenck Process Linearschwingsieb vom Typ LinaClass® SLG hat mit 4 x 10 Metern gigantische Ausmaße. Es ist das größte Schenc...
Read more

templine - Electrically heated hose Assembled heated-hose system with heating cables installed on surface, integrated and fixed in a temperature resistant braiding. Heating cables produce uniform h...
Read more

Here you will find detailed information about our wide product range of hoses and connecting systems
Read more

Fire and machinery protection of production equipment ensures an uninterrupted production and can help avoid damage to property and persons. GreCon fire prevention systems offer this protection. The m...
Read more

SWECO® Fusion™ Screen’s unitary construction integrates the screen gasket directly into the tension ring. This complex robotic construction creates precise repeatable tensioning and engineered un...
Read more

The SWECO® GyraMax™ Gyratory Sifter can increase your plant’s productivity by reducing the costs associated with routine maintenance and unscheduled repairs. That means fewer production outages a...
Read more

Read more

Read more

Read more

Read more

Notice our catalogue with a new and innovative design: www.norres.com
Read more

- Turnkey mixing towers (towers, level plants, and modular design) - Upgrading - Plant extensions and plant sections - Special designs for your requirements - Silo plants - Decentralised additive...
Read more

Read more

Engineering, Design and Static calculation for Silos, Steel structures and Silo plants
Read more

Silo Top Filters
Read more

All Accesories for bulk material handling
Read more

Silos for bulk and fluid materials
Read more

Read more

Read more

Read more

Read more

Read more

Read more

Comminution/Grinding Mixing/Homogenising Screening/Classification of particle size Sifting/Separating of material density Dedusting of bulk materials Repackage, filling and packing of bulk materi...
Read more

Initial and replacement tensioning of screen frames and rings of all sizes Manufacture of entire screen frames and rings of all typical materials Complete solutions for many branches, e. g. wood chi...
Read more

Wire mesh and grids Synthetic fabrics Silk fabrics Knitted parts as flexible tubes and pressed articles Parts shaped by etching Manufacture from wire mesh and synthetic fabrics Use in almost all...
Read more

Scherer Poliurethanschlauch für abrassive Materialien
Read more

Absaugung und Transport von Schüttgut
Read more

Stahldrahtspiralschlauch in einem patentierten Spezialverfahren hergestellt.
Read more

Pneumatic unloading of trucks and wagons with integrated compressor or separate compressor station into the silos. Loading systems for trucks, trains and ships for dry or wet bulk materials.
Read more

A wide spectrum of silos for storage, blending or homogenization of bulk materials. Various constructions are available like dome silos, silos with flat bottom or with displacement cone, large capacit...
Read more

With the Möller® Pump and Möller® FK-Pump we always have the right pump for yor application. Reliable and easy to maintain.
Read more

In connection with pressure vessel systems the most economic pneumatic conveying system. Low energy consumption, low wear and tear, high availability, reliable and long-lasting.
Read more

World-leading technology for economic and reliable transport of bulk materials. Conveying capacity of more than 300 t/h, conveying distance more than 3000 m without intermediate stations have been rea...
Read more

Ob Ermittlung von Feuchte oder flüchtigen Bestandteilen (LOI), Kohlenstoff- oder Schwefelbestimmung, mit unseren vollautomatischen Analysatoren unterstützen wir Sie bei Ihren Laboranalysen.
Read more

Mit unserer automatischen Rohrpost transportieren wir Ihre Proben für die chemische Analyse unverzüglich vom Ort der Probenahme bis ins Labor.
Read more

Unsere Probenahmesysteme zur Beprobung von Schüttgütern in bewegten Massenströmen sind nach den einschlägigen Normen ausgeführt und auch für Abrechnungszwecke anerkannt.
Read more

Read more

Read more

Read more

Read more

Read more

Read more

The Bulk Fuel Spreader is best possible solution for direct feeding of incinerators and homogeneous feeding of incinerators, bins and stores. It provides reliable & continuous feeding, crushing a...
Read more

FLSmidth Submerged Scraper Conveyors are designed for different applications and materials, such as extinguishing, cooling, dust-proof conveying of ash, slag or other combustion residues. The subme...
Read more

Alternative fuels are received by truck reception boxes or bunkers with different discharge devices (rotor activators, drag chain conveyors, etc.) according to the application for further transport to...
Read more

FLSmidth’s KOCH Conveyor Chains for drag chain conveyors and bucket elevators: extra-strong with special welding lugs – for transporting all types of bulk material. Practical, functional, indiv...
Read more

FLSmidth’s KOCH Twistex - The rotor type activator for non-free flowing materials KOCH Twistex provides optimal silo discharge of non-free flowing materials. The innovative design of the rotor-...
Read more

FLSmidth is your partner for complete silo systems. From truck reception to incinerator feeding -- FLSmidth provides expert, optimal solutions for our customers tasks on a world-wide basis. The main f...
Read more

The KOCH TKF drag chain conveyor from FLSmidth: with over 6,000 installed chain conveyors, FLSmidth’s successful system for economic enclosed conveying of all kinds of bulk materials, from Coal, sor...
Read more

FLSmidth stockyard equipment – state-of-the-art systems for efficient materials handling. FLSmidth stockyard equipment is designed and manufactured to fulfill the sophisticated needs of high capaci...
Read more

FLSmidth supplies reliable loading and unloading equipment for a variety of materials for all your bulk-handling needs. From port handling equipment, including ship loaders, continuous ship unloaders ...
Read more

Read more

Read more

Read more

Read more

monitoring instrument for powder and bulk transport
Read more

TBMA Rotary valves are an essential part of your process equipment for pneumatic conveying or dosing of powdered and granulated materials. AGRICHEMA has experiences in different areas of bulk industry...
Read more

SYMALIT® Fluoroplastics show an excellent chemical resistance, good temperature withstanding and good anti-adhesive properties. The materials PVDF, ECTFE, FEP, MFA and PFA are used as lining for cor...
Read more

System TIVAR® Engineering liners made of TIVAR® 88 and TIVAR® BlueLine prevent bulk material stoppages that can result from caking, arching, freezing, rat-holing, or corrosion in storage and transp...
Read more

Sophisticated material handling comes from Münstermann. Material handling is an important part of every industrial production process. The loading of kiln cars, applications in the food and chemical ...
Read more

Your advantages: For the past 30 years we have fulfilled our customers’ special requirements and have designed developed and produced drying plants as special projects. Many years of experience, com...
Read more

Filter solutions are offered by MÜNSTERMANN since the take-over of the company Lüscher Filterbau AG in 2002. Lüscher itself stemmed from a pioneer of the dedusting branch the company Standard Filte...
Read more

The NEOTECHNIK NFCT compact surface filter operates fully automatically with a compressed air cleaning system. This custom-made filter allows economic operation with a constantly low filter differenti...
Read more

The NEOTECHNIK NFD range of reverse jet filters operates by compressed air cleaning and is able to accommodate a filtration area of up to 2,000 m² in one filter housing. Custom-build to specification...
Read more

The NEOTECHNIK NFS range of reverse air filters comprises a series of modular filter units up to 2,000 m² filtration area. The filter system provides continuous automatic reverse air cleaning with a ...
Read more

bulk solids handling – the sole truly international technical journal for all aspects of bulk materials handling provides all those involved in the mining, cement, metallurgical, chemical, and powe...
Read more

Schüttgüt the leading technical journal for bulk material handling industries in German language provides specialists with cross-sector information about the latest trends and developments in bulk ...
Read more

Read more

ProFlex® C Optimiert, wartungsfrei, anpassungsfähig Die neue Dosiergeneration für die Compound Industrie Die Differenzialdosierwaage ProFlex® C ist in bewährter Schenck Process Qualität sowie St...
Read more

Differenzialdosierwaage MechaTron® Min Klein, fein, flexibel Gravimetrischer Kleinstmengendosierer auf hohem Niveau Je feiner und kleiner die Fördermengen, desto höher die qualitativen Anforderun...
Read more

Cooling and heating are carried out individually or in combined with trough, cover or worm shaft. Water vapor, thermal oil, gas or electrical heating mats are used as heat transfer medium. Out worm he...
Read more

The rotary valve was developed and produced by us to resolve the problem of remotely controlled, production appropriate dosing. The rotary valve is particularly well suited for charging fine dosing sy...
Read more

Under the pressure of a fluid ( air, water ) injected into the valve body, the sleeve is compressed closing completely. As soon as the pressure of the control fluid stops, the sleeve opens completely....
Read more

Ball valves are shut-off devices that are switched through 90° by means of a hand-operated lever or a drive to the positions OPEN and CLOSED; ball valves are not suitable for intermediate positions o...
Read more

WAREX protection system WAREX protection systems are used for blocking, throttling and regulation of gases, fluids, dusts and hybrid mixtures in pipe systems. They consist of two pressure shock...
Read more

Material: Polyester-Polyurethane, Colour: clear Single Length: 10 m Temperature Resistance: -40 °C up to +100 °C Applications: Suction and transport ob abrasive materials e.g. sand, pebbles, grai...
Read more

Material: Polyester-Polyurethane, Colour: clear Single Length: 10 and 15 m Temperature Resistance: -40 °C up to +100 °C Applications: Suction of abrasive materials, transport of granulates Prope...
Read more

RUD forged chains Forky impress with the outstanding qualities of their material. Drop-forged alloyed steel ensures the highest strength and long-term durability and so guaranteeing performance. The u...
Read more

Bucket back wall attachment for bucket elevators with toothed and non toothed wheels
Read more

The sensors are easily screwed upon the silo base frame. The production process can thus be continued during their installation. Charging and emptying the silo cause length changings of the steel base...
Read more

MTS offers a comprehensive selection of load cells and modules allowing for tank and silo weighing or any other type of vessel. These load cells and modules are able to meet a wide range of requiremen...
Read more

The GMD/EE micro batch feeder is a gravimetric micro dosing system which was developed by MTS. It is suited especially for the dosing of fine grained bulk materials such as powder or granulates tendin...
Read more

Universal unit for automatic feeding of extruders, processing machines, hoppers and storage silos. Handles powders, pellets or granulated/flaked products with some powder content. Large filter surface...
Read more

special silicone coated fabric, FDA approval, multi-layer, with or without connecting system
Read more

special high temperature hose up to +300°C with internal stainless steel coated fabric, highly abrasive resistant, used for transport of hot granules or metal pieces
Read more

special electrical conductive hose without any spiral, produced from diameter 50 mm up to 400 mm, used as compensator
Read more

For almost 40 years now, we have been offering our customer an optimised level of plant engineering. We see support for our projects, from the planning phase through to acceptance and far beyond, as p...
Read more

The HDS rotary feeders are mainly used for the discharge (dosing) of pellets and powders from silos. Furthermore they are used as a feeding device in pneumatic dense phase and dilute phase conveying s...
Read more

Sampling of powdery and pelletized products out of the product stream in gravity pipes or hoppers at normal atmospheric conditions or over/under-pressure range (max. 1 bar).
Read more

More and more users take external service providers to benefit from their technical experience in plant construction in the field of bulk goods as well as to achieve more freedom for their staff to ca...
Read more

For hygienic and dust-free discharging of Big-Bags with or without liner
Read more

The V-Diverter valve is used especially for diverting the bulk material flow in pneumatic dense and dilute-phase conveying systems. The patented design of the plug enables application in any convey...
Read more

Big-Bag / container filling station for free-flowing, slow-flowing, dusty or agressive products
Read more

extremly robust hose made of PUR with a wallthickness of ca. 3,5 mm
Read more

abrasive resistant hose made of PUR with a wallthickness of 1,45 mm
Read more

Highly effected and tested discharge aids for safe discharge
Read more

Flexible solutions for transport and temporary storage
Read more

Flex-Silos provide maximum use of available space, have a very long durability and are above all flexible and versatile.
Read more

■Available as a gross or a net weighing system depending on the required use; or as a floor scales or a suspended weighing system, installed above mixing plants; as container scales; as a weighing s...
Read more

■For the conveyance of granulate and powder components depending on a product prototyping process that progresses in a positive manner. ■The pneumatic conveyors for operation through ventilator u...
Read more

■Design as a single and/or double-shaft screw, with a double casing for heating and/or cooling; as pipe screw or trough screw; with an impact protection casing; without an intermediate bearing. ■...
Read more

An m-tec development, POWERDOS® is a modular, fully automated dosing system for small constituents. Ideal for the high-precision dosing of bulk materials like dry granulates and powders, in particula...
Read more

Ceramic compound materials are wear protection materials, which consist of a 2-component polymer matrix phase and a reinforcing phase made of different fillers. They are used in the repair and mainten...
Read more

REHART composite armour plates are self-supporting wear protection plate sections, which we can supply made to measure or supply as plates for further machining. With REHART composite armour plates, y...
Read more

Read more

You can expect only the most exacting standards from us ! Our machine shop is equipped with the latest machinery. The forged links are fabricated using this equipment. Our slogan: Our long-term experi...
Read more

Our standard chain wheels are manufacured from C45 material and the toothed profiles can either be flame or inductive hardened. For high wear resistant requirements, tooth segments can be manufactured...
Read more

Apron feeders are manufactured in various designs for application in dry or wet areas
Read more

OPTIMUM PROTECTION FOR A WIDE RANGE OF MATERIALS TO BE HANDLED Even extremely fragile products such as foodstuffs, chemicals or goods at temperature are handled in the gentlest way, maintaining thei...
Read more

Conveyor belts are used to transport both unit loads and bulk products. A basic advantage of conveyor belts is their particularly quiet operation. HUMBERT & POL – our conveyor belts offer outsta...
Read more

FLEXIBLE BULK MATERIAL CONTAINERS Flexible bulk material containers are increasingly used as transport and storage packages. With HUMBERT & POL’s Big-Bag filling and discharge stations, you c...
Read more

Lift and tip stations by HUMBERT & POL optimize procedures during manufacture. Containers need to be lifted, lowered or tipped. Lift stations distribute cases, stackable bins or pallets to vario...
Read more

Pendulum bucket elevators The gentlest method of transporting bulk goods Conveyor belts Modular design like our bucket elevators Big-Bag Filling and Discharge Stations Tailor made to our clien...
Read more

There are many solutions for the problem of elevating crates, cartons, trays, sacks, shrink-wrapped packaging, canisters, etc. With the spiral elevator, HUMBERT & POL has combined all the advantage...
Read more

Read more

Read more

Read more

Read more

Read more

Read more

Read more

silo weighing systems silo inventory control by way of silo pilots, ultra-sound visualization systems control and maintenance systems
Read more

aluminium silos stainless steel silos flexible silos with silo base plate made of concrete loading silos mixing silos multi-chamber-silos trevira silos
Read more

Read more

cone screw mixers cone blade mixers
Read more

big bag discharge stations big bag filling stations bag discharge stations octabin turning stations octabin return stations
Read more

conveyer spirals conveyer screws rope haulage systems pressure feeding systems
Read more

aluminium containers stainless steel containers small containers day tanks special containers multi-chamber-containers mixing-containers
Read more

For more than quarter of a century Kobato B.V. have specialised in the processing of polyurethane. Thanks to Kobato's ongoing investment in personnel, expertise and technology, the business has develo...
Read more

Long Probe IPP 70-SL Just like the smaller IPP 70-S standard models, the IPP 70-SL provides the com-plete particle size distribution within a range from 50 µm through 6,000 µm in real time. In large...
Read more

IPP 70-S/Se - Rugged Industrial Solution The Parsum Particle Probe IPP 70-S/Se uses the established technique of Spatial Filter Velocimetry to make size and velocity measurements of gravity fed, pneum...
Read more

- Metering and sealing elements - Injektors IJ - Air vent box LS - Needle valve NS - Increaser UE
Read more

The distributors made by Barl Maschinenbau GmbH are extremely robust and thus ideal for even the most harsh applications and conditions. The cleaning covers integrated as a standard feature ensure qui...
Read more

Our special valves are designed for use under non-standard conditions: - in the presence of system and/or differential pressures - high frequency of switching actuations - at elevated temperature...
Read more

BARL screw conveyors are used for the continuous conveying, discharge and the volumetric metering of powdery, fine-grained and granular bulk materials with different physical properties. The screw...
Read more

The agglomerate crushers made by Barl Maschinenbau GmbH are usually equipped with exchangeable beaters. As a standard feature, the integrated cleaning covers ensure quick and easy cleaning. Dependent ...
Read more

Barl free-flow flap are used as sealing flaps underneath bins or inside pipelines and ductwork. When open, the entire inside diameter of the valve opening can be utilised without hindrance. The fre...
Read more

BARL double-flap valves are usually installed underneath filters or cyclones as discharge elements or within ductings as air locks. The bulk material must be metered to the double-flap valve becaus...
Read more

The BARL – discharge aids are used for emptying silos and bunkers containing powdery, fine grained and granular bulk materials with different physical properties. The discharge aid loosens the bulk ...
Read more

Rotary valve for pharmacy Our Rotary valves for pharmacy are suitable for powdery and finely grained bulk materials. Please specify the range of grain sizes when making your enquiry. The bulk materi...
Read more

Although this type of valve is used predominantly in the timber industry, it is also suitable for metering coarse grained and fibrous bulk materials. The bulk material must have good conveying and flo...
Read more

Our blow-through rotary valve is suitable for powdery and finely grained bulk materials. Please specify the range of grain sizes when making your enquiry. The bulk material must have good conveying an...
Read more

Our rotary valves are suitable for powdery and finely grained bulk materials. Please specify the range of grain sizes when making your enquiry. For reasons of operational reliability, this type of val...
Read more

Our tangential rotary valves are ideal for handling bulk materials with good conveying and flow properties up to a feed size of 35 mm, dependent on the size and the entire particle size range, in floo...
Read more

Our rotary valves are suitable for powdery and finely grained bulk materials. Please specify the range of grain sizes when making your enquiry. The bulk material must have good conveying and flow p...
Read more

Our Precise dosing system is suitable for powdery and finely grained bulk materials. Please specify the range of grain sizes when making your enquiry. The bulk material must have good conveying and fl...
Read more

Our flat-body and round-body valves will shut off powder and finely grained bulk materials up to a feed size of 20 mm. Wearing plates, sealing and supports are naturally exchangeable. The four-lay...
Read more

KREISEL Double Flap Gate Valves provide for a secure discharge of dust and granular and coarse bulk material while machining rooms are closed at the same time.
Read more

This especially developed series of KREISEL Slide Gate Valves enables for a wide range of use, even under extreme and complicated operating conditions. - Manually operated slide gate valves - Pneum...
Read more

KREISEL Two Way Distributor for the optimum control of the bulk material flow.
Read more

Rotary Valves are used to discharge bulk material from containers with a constant volume throughput or to volumetrically proportion bulk material in plant components or conveyor systems. - shock-resi...
Read more

Read more

Welding Alloys’ range of wear plates comprise a base plate of construction steel and a wear resistant coating appliedby arc welding. Produced using specially developed Welding Alloys cored wires, th...
Read more

WA Integra have developed a unique level of expertise in cladding and hardfacing, whether in-situ or in our own Integra Service Centres. Our teams of highly experienced welding engineers have mastered...
Read more

Key to the success of WA MultiSurfacer machines is the quality of the components and the suitability of the design. Working closely with the customer at the initial stages and all through the build, o...
Read more

Purchase cost is not the only consideration when deciding upon a welding consumable, though it is a strong factor. The choice must include the critical factors of production time, re-working, finishin...
Read more

Hardfacing by arc welding is a surfacing operation to extend the service life of industrial components, pre-emptively on new components, or as part of a maintenance programme. The result of signific...
Read more

When taking samples of bulk material or powders, the usual known techniques are problematic in that over time the fines penetrate the bearings and ultimately causes inevitable blockage. Additionally t...
Read more

The REMBE® Q-Rohr®-3 guarantees the indoor explosion venting without any flame and dust propagation. It is the only indoor explosion device recognized worldwide by NFPA 68 and accepted also by VDI 3...
Read more

Results of research and development should not be achieved by chance. Therefore REMBE® cooperates again and again with leading research institutes. The development of the C-LEVER® direct flow me...
Read more

When looking for a robust, low maintenance, and economic production control of output or truck loading. The UNIBAND® conveyor belt weighing system offers your best solution. The design core of the U...
Read more

Read more

Read more

Read more

Read more

Read more

Read more

Read more

Read more

The Mucon Butterfly Valve has many uses in many different fields like Chemical, Food and Oil industry.
Read more

The Mucon Promo-Flow is the answer to the problem of non-discharging product from bins, silos or IBC´s.
Read more

A particle sizing system for universal use! The ConiWitt is ideal for insdutrial applications as well as lighter duty laboratory work. Thanks for its modular design, this conical sieve mill can be ea...
Read more

Read more

Read more

Read more

Read more

Read more

Read more

SMB Shiploading – Schiffsbeladeanlagen SMB Shiploading – Ship-Loading-Systems Schüttgut-Beladung Loading-systems for bulk-materials
Read more

Auflockerungskissen zur Fluidisierung von Schüttgütern Silo-Flo: aeration pads for fluidization of bulk materials
Read more

Palette-storage-systems On smallest area the biggest area-exploitation: This is the concept of the compact-storage-system. This concept is also valid for the storing of palettes: As long as the use...
Read more

Transportanlagen Transportanlagen von SMB Logistics sind die ideale Ergänzung zu den Abfüllanlagen, den Palettieranlagen, den Schiffsbeladeeinrichtungen und der Lagerlogistik – alles vom gleichen...
Read more

semi-kontinuierliches Füllstand-Messsystem Lot-Prinzip semi continuous level measuring system sensing weight principle
Read more

Kontinuierliche Füllstandmessung mit Radar continuous level measuring system with Radar type
Read more

MBA 2.2, MBA 3.2 „TYPE MAIHAK“: Füllstandmessung für Voll-, Bedarfs- und Leermeldung bei Staub- und Gas-Explosionsgefahr im Vorratssilo MBA 2.2 and MBA 3.2 "TYPE MAIHAK": level indicators for...
Read more

Membranschalter
Read more

Schwingflügel Vibrating paddle
Read more

he manually or pneumatically operated sampler can be used for powdery and granulated products. ■The appliance can optionally be used in a semi-automated and fully-automated mode. ■Material sel...
Read more

■Conveyor belts for bulk materials and units loads, as a flat belt conveyor or with a cleated belt design. ■For assembly outdoors or in enclosed halls. ■Flat belt conveyor optionally with a bo...
Read more

Sack emptying stations for all bulk materials. Design for powdery products with a filling bubble cap and a hinged cover. A connection for a central filter or a dedusting filter that is directly attach...
Read more

BIG BAG filling systems ■The filling system can optionally be designed as a standing or suspended weighing device. (Can also be appropriate for verification at the customer's request) ■Gibbet de...
Read more

Depending on the respective product flow characteristics as ■Ventilators ■Vibration discharge device ■Screw discharge device ■various fulling systems
Read more

■Size variants based on customer demands whilst taking account of the respective case of use. ■Rounded off with a level indicator and connections for the filter, discharge etc. ■Discharge equi...
Read more

Read more

Big-Bag-Entleer- und Befüllstation Verschiedene Ausführungen für die sichere Be- oder Entladung und Handhabung der Big-Bags. Beladeeinheiten mit integrierten Waagen und Rollenbahnen zum Weitertran...
Read more

With more than 300 installed systems and more than 150 km of conveying length located in 44 countries, the KOCH Pipe Conveyor® from FLSmidth is clearly Number One in the world. No other pipe conveyor...
Read more

Ease of use, flexibility, reliable performance and quality of service have made Brookfield Viscometers favorites all over the world. From our simple-to-use analog, to our more sophisticated, versatile...
Read more

Compression and tension testing became simplified with the introduction of the Brookfield Texture Analyzer. Compact, yet powerful, it offers features comparable to higher end texture analyzers - at a ...
Read more

The new Brookfield Powder Flow Tester provides quick and easy analysis of powder flow behaviour in industrial processing equipment such as hoppers/silos.
Read more

Wherever material will be conveyed, and wherever there is high strain, our products will be used. Through their sophisticated design and robust manufacturing they contribute a great deal to the extens...
Read more

The Rotoform process is economical and reliable, delivering dust-free pastilles that provide all the key advantages of this product form, i.e. easy product flow and high bulk weight for easy bagging, ...
Read more

Screening machines manufactured by SIEBTECHNIK are the perfection of screening. Scalping, classifying, de-dusting and de-watering of sand, gravel, building material, aggregates, minerals, ores, pelle...
Read more

Pulsating jigs are specially designed for separating light and heavy components by density. Examples are the removal of harmful particles from sand and gravel as well as building rubble, cleaning of p...
Read more

FIBERDOS® from m-tec is the flexible dosing system for the fully automatic incorporation of fibres in bulk material processes. It consists of an oval or rectangular silo container with specially con...
Read more

The heavyweight with 5 – 100 t/h The MTA mixing tower plant from m-tec puts customers at the top! The plant model features a compact, vertical layout and modular design. The mixing tower plant is s...
Read more

The fast flexible answer with 5 – 50 t/h The RMA serial mixing plant from m-tec is always in demand throughout the world when installation height is limited. In particular, the RMA is characterized...
Read more

The small compact plant with 1 – 10 t/h The KMA from m-tec is a small, compact mixing plant with an output of 1 – 10 t/h and is thus the perfect answer when there is minimum space. It is mainly u...
Read more

-Personnel not required -Saving space -Maintenance-free -Minimal cost of operation Complete removal of Material without the presence of personnel. Lifting, tilting or turning-around the full containe...
Read more

Universal hose (electrically conductive) made of polyurethane with coated spring steel spiral embedded in the wall. Highly suitable for conveying abrasive solids such as dusts, powders, fibers, wood s...
Read more

Universal hose made of polyurethane with coated spring steel spiral embedded in the wall. Highly suitable for conveying abrasive solids such as dusts, powders, fibers, wood shavings, granulates, coars...
Read more

Durable hose made of polyurethane with coated spring steel spiral embedded in the wall. Highly suitable for conveying abrasive coarse-grained solids such as wood shavings, granulates as well as liquid...
Read more

Reinforced hose made of polyurethane with coated spring steel spiral embedded in the wall. Highly suitable for conveying abrasive coarse-grained solids such as wood shavings, granulates as well as liq...
Read more

Read more

Read more

Read more

Read more

Read more

Read more

Read more

Read more

Read more

Leading in bulk goods handling, dust extraction, ventilation plants On easyFairs Schüttgut 2011 JACOB presentates its programme of explosion proofed conveying pipe systems for bulk good handling, du...
Read more

Our drop forged conveyor chains are manufactured on requests and they are exactly adapted to the bulk which need to be conveyed. The range of the available forged steel grades reaches from case-harden...
Read more

stainless steel branch-pipes (30° and 45°) and T-pieces material no. 1.4301 (AISI 304) - immediately ex stock outer diameter: 38.0 mm - 129.0 mm wall thickness: 1.5 mm / 2.0 mm
Read more

Couplings for pneumatic conveyors for a fast, safe and economic installation: DVK-HD® high pressure - heavy version for pressure conveying up to max. 12 bar D...
Read more

Read more

Read more

Pneumatic conveying systems in Hygienic Design for the food, pharma and chemical industry system-technik GmbH developed recently a new pneumatic feeder in Hygienic Design acc. EC-guidelines and pr...
Read more

solids Rotary valves pressure shock resistant and flame propagation proof as protection system acc. ATEX Dusts, processed in the industry, become more and more fine. In case of flammable dusts, to...
Read more

New solids Rotary valves in Hygienic Design acc. EHEDG - Guidelines The solids Rotary valve Type SRVS has been advanced by S.S.T.-Schüttguttechnik GmbH to Hygienic Design. It is easy to dismantle ...
Read more

Fine-grained bulk materials such as colouring pigments, manganese dioxide, soot, cement, coal dust, various ceramic powders, powders for the food industry, pesticides and many other materials are very...
Read more

Storage, mixing and discharge of bulk materials with average particle sizes of less than 0.1 mm frequently causes problems because these bulk materials do not flow freely and therefore are almost impo...
Read more

Problems are often experienced when handling powdery and fined-grained bulk materials, such as flour, cement, pigments or fine plastic powders. Storage, mixing and discharge are difficult because thes...
Read more

Problems are often experienced when handling powdery and fined-grained bulk materials, such as flour, cement, pigments or fine plastic powders. Storage, mixing and discharge are difficult because thes...
Read more

Storage, mixing and discharge of bulk materials with average particle sizes of less than 0.1 mm frequently causes problems because these bulk materials do not flow freely and therefore are almost impo...
Read more

Auszug aus dem Lieferprogramm der Fa. OLKO, über weitere Produkte und Entwicklungen können Sie sich am unserem Messestand informieren.
Read more

Just the right amount at the right time and the right place. Material feeding systems for bulk material, if necessary with dosing system and mixer, are the core business of DERICHS GmbH Verfahrenstech...
Read more

Das Online-Messsystem Micro-Polar wird in der Schüttgutindustrie eingesetzt um die Materialfeuchte zu überwachen. Micro-Polar arbeitet völlig berührungslos - die Komponenten der Mess-Einrichtung s...
Read more

We have a very wide experience in automation and engineering sampling and sample preparation equipment to very special customer need in various industries.
Read more

Rotary Sample Dividers with broad capacity range and with unique modular system for better equipment utilization.
Read more

Cutting Mills for soft, hard and brittle materials. Endfineness approx. 2 mm with unique througput through big effective bottom screens.
Read more

Ring Mills for fine milling. Wide range of milling capacities from 50cc up to 10000cc for a wide variety of materials to mill. Very effective in milling combined with easy and secure working condition...
Read more

Jaw Crushers with world wide tested solid quality for coarse primary crushing with wide range of models up to 250mm feed size and ranging from 2.2kW to 22kW motors. Customizable to your needs.
Read more

The online measurement system Micro-Polar is used to monitor the moisture of bulk materials. The measurement is carried out absolutely non-contacting, meaning that none of the measuring components is ...
Read more

We are specialized in thin-walled pipe bends with large bending radii, especially for pneumatic conveyors. The tubes are cold-bent on a CNC-mandrel machine without pleats. Our quality management gu...
Read more

Tubular feeders cover segments of up to 10 m when arranged horizontally in a closed design. This model is used for dust-free transportation of bulk materials at a speed up to 80 m3/h.
Read more

Magnetic vibrators can be used very versatile. The advantages of magnetic vibrators match all designs of vibrating machines. For almost each case of application in the vibration feeder technology and ...
Read more

Unbalanced motors can be used as drives for almost each case of application in the vibration feeder technology and over all industries. Unbalanced motors are the prefered drive system, in particular i...
Read more

Vibrating screens solids into several grain size ranges, sieves small quantities of over-or undersized material and separated the screenings from impurities and foreign matter.
Read more

Spiral conveyors are used in process operations where bulk materials are transported continuously vertically. The tough, wear-and low-noise working spiral feeder offers itself as energy and space savi...
Read more

Bin discharge units are used as bin closures during standstill. An inclined installation is preferred. Mounted on the bin outlet flange, it consists of a trough feeder, discharge chute, discharge case...
Read more

All conveying feeders can be equipped with either a stationary or a resonant cover. Selecting a suitable liner can prevent or reduce wear and the tendency for material to "cake".
Read more

The Tomal Feeders are volumetric multiscrew feeders for safe discharge and accurate metering of solids. With there unique construction with double acting feeding screws the Tomal multiscrew Feeders ar...
Read more

Together with the TOMAL multiscrew feeder you get a complete feeding system for solids out of big bags. Our big bag emptiers are suitable for reusable and disposable big bags.
Read more

Turnkey automatic preparation units for solid and liquid polymers. Batchwise and continously systems.
Read more

complete feedeing plants and single feeding equipments for solids, optional with silos or big bag emptier.
Read more

motan‘s GRAVICOLOR meters and blends up to 6 materials with high accuracy and repeatability. This gravimetric blender is specifically designed for injection, blow molding and extrusion. With the GRA...
Read more

The motan CBF belt feeder consists of a stainless steel housing fitted with two removable side panels with a belt feeder inside. Once the belt feeder has been released, it can be easily removed throug...
Read more

In the plastics compounding and manufacturing process there are many powders, all with different flow properties that require handling. For the vacuum conveying of both free-flowing and non-free-flowi...
Read more

with automatic filter cleaning by implosion, automatic material demand via discharge flap and proximity switch. * Hopper volume: 1.5/06/10/15/30 litres * Parts in contact with material made o...
Read more

C-FLEX is designed to offer the greatest flexibility in flexible walled feeder design and construction. C-FLEX is ideally suited for dosing powders, pellets, granulates, regrinds, fibers, and flakes i...
Read more

motan's C-FLEX is designed to offer the greatest flexibility in flexible-walled feeder design and construction. C-FLEX is ideally suited for dosing powders, pellets, granulates, regrinds, fibers, and ...
Read more

GRAVIPLUS is a continuous loss-in-weight gravimetric dosing and blending system for free-flowing granulates, reclaim, powder, fluids and fibers. Each GRAVIPLUS can have one to eight precision screw fe...
Read more

RUD-Chains, due to their excellent chain core toughness, have high breaking strength and resistance to brittle fracture. Although generally with increased case hardening depth of round steel link c...
Read more

for high output bucket elevators
Read more

The mechanical system particularly requires an increased accuracy of weighing results even under difficult ambient conditions as well as the capability to process substances which on the one hand, are...
Read more

Isolated Additive Dosing Unit Broadens Variety of Raw Materials and Products, these units are mainly and successfully used in the production of dry building material as well as in the paints and varni...
Read more

Due to the often raising amounts of raw materials as well as the increasing number of raw materials in the plants an increasing of silo and dosing capacities is required. The following criteria was co...
Read more

PRONTO is a high-performance process visualisation system designed for operation and data acquisition (SCADA) as well as a system designed for control of the process and production level (MES). PRO...
Read more

Sensors for level detection of all liquids and bulk materials. Special versions for chemical-, food-, explosion-, agricultural-, applikations with and without "EASY TEACH" adjustment. Capacitive L...
Read more

Features * Dust-free, hygienic operation * Quiet, vibration-free action * Quick screen change – 2 minutes or less * Easy clean-out * Double sealed outboard bearings * High t...
Read more

Features * High throughput capacity * Low overall height * Long service life * Extremely low maintenance * Simple and hygienic to clean (CIP) * Easy dismantling with quick rel...
Read more

Features * High output with minimum fines * Low working noise level * Dust free operation - closed and compact to prevent powder leakage * Oscillates at low speed preventing ...
Read more

Features The Poly-Mills deliver excellent product quality on a constant basis over extensive production periods. Designed with high mechanical robustness these mills offer not only efficiency and oper...
Read more

* Multiple numbers of product inlets possible * Low headroom design * No drive components in product space * Cantilevered shafts, no foot bearings * Flush bottom discharge valve...
Read more

Detailled information about SCHNEIDER products
Read more

Round and rectangulars vibrating screens for scalping and sizing of dry products in different fractions, as well as separating solids from liquids.
Read more

MAGBOX FOOD/PHARMA inline magnet systems are mainly used for highly sensitive applications such as in the food and pharmaceutical industries. The robust and wear-resistant housing is made of rustproof...
Read more

MAGBOX inline magnets are mainly installed in existing pipeline systems to remove fine and very fine ferrous metal contaminants from bulk materials. Powerful magnets remove even low magnetised stainl...
Read more

A maintenance contract with Mesys guarantees a full usabillity of your system. We take over your maintenance, repais and replace what's needed and you can reach us 24 hours a day end 7 days a week.
Read more

We design and install conduit-pipe systems which guarantees and standard airflow with the requested low resistand transport. We guarantee a continues airflow with no blockages and low maintenance cost...
Read more

We design and produce a various types of cyclones., such as; dustcyclones, productcyclones, cyclo-condensor, etc. Each one is exactly tuned on your product an requirements.
Read more

Mesys designs special integrated air systems which includes all the airflows in the bulkhandling department, such as dedusting, pneumatic transport, drying air flows, airbalanced klimatsystems
Read more

Special requested systems for coal, biomass, tobacco, starch, cofee, sugar, steel
Read more

All types / techniques of deodorisation. Specialises katalist systems, O3-systems, Scrubbers, etc. Tailor made systems
Read more

Read more

Variety Tailored to Your Needs. For the horizontal or angular conveying of a variety of bulk materials, we plan, design, and construct plants tailored to your special requirements: Screw co...
Read more

Conveying Methods with Testing Option. Pneumatic conveyors often are particularly suited for conveying highly complex, sensitive or abrasive bulk materials in small space and over large distances. ...
Read more

Creative and Sophisticated. In close cooperation with our customers, we develop special products for special problems and tasks: For the disposal of grenades and ammunition - transport and transfer...
Read more

Round vibrating screeners VPM, VP2, VSB, VLB for wet and dry screening applications ScreenX round and rectangular screening machines CS, CD, RS, RD in single and double deck version for the screening ...
Read more

At present, the series Delta Screw Generation 5 is available as belt-driven design for overpressure-, vacuum- and nitrogen applications in various nominal widths.The new series Generation 5 consists o...
Read more

The LPA L is a compact photo-optical measurement system, which analysis the size and shape of particles in suspensions and emulsions. The LPA is suitable for the use in laboratories for quality contro...
Read more

The LPA M – Liquid Particle Analyser - is a photo-optical analyser for measuring the particle size and shape in suspensions and emulsions (siez range: 1 - 2.000 micron) The LPA is suitable for the ...
Read more

The PartAn 3001L - is a photo-optical analyser for measuring the particle size and shape of free flowing powders and granulates. The new multi-imaging-technology is capable to analyse the particles si...
Read more

Generally dust will form during the production process of granulates and powders or while handling such materials. Products for the end user or intermediate goods for further processing with a minimum...
Read more

Read more

Read more

Big-Bag discharge unit, to be operated by forklift (crane optional); with buffer container to provide sufficient time to change bag; Multifunctional - Can also be used with bags and octabins
Read more

Mobile silo feeding device for freeflowing resins and bulk materials, easy to operate and very flexible in use; can be used with bags or optionally with big-bags, several sizes available
Read more

Wir stellen Förderketten und Transportketten in vielen Bauarten und Abmessungen für verschiedenste Anwendungsgebiete her und begleiten Sie von der Problemstellung bis hin zum Einbau der benötigten ...
Read more

Read more

BigBag Handling
Read more

Stationary or mobile: You have the choice – we the Know-How.
Read more

We prove what others promise. 100% ready-for-use dry mortar plants.
Read more

For us Material Handling is a logical interface for complex industrial plants.
Read more

Closed Conveyor System
Read more

Loading Chute Seals, Transfer Point Seals
Read more

Series PKL pneumatic impactors are particularly suitable for knocking stubbon residues from walls, pipes and containers. Examples of applications include: ellimination of tube-forming, bridging and ev...
Read more

Impact Bars
Read more

Blower units DELTA BLOWER Generation 5 For the new series Generation 5, 12 sizes are available for intake volume flows from approximately 30 m³/h to 5.400 m³/h and overpressures up to 1000 mbar.The...
Read more

Air operated Pinch Valve Function: Supplying compressed air/fluid (minimum pressure difference 2 bar) into the casing compresses the sleeve, which is specially manufactured with high rebound elasticit...
Read more

Read more

Read more

Read more

The safe and economic solution to protect your pump and plant against overpressure. Function: The pneumatic Pinch Valve will be pressurized through the pressure relief section by a minimum different...
Read more

Read more

Aerators for Silos, Hoppers, Chutes, Road Tankers, Bins any many more applications. Aerator pads, also known as flow pads and aerators, are used to help the flow of discharging bulk products from sil...
Read more

Material: Polyether-Polyurethane, Colour: clear Single Length: 10 and 15 m Temperature Resistance: -40 °C up to +100 °C Applications: Suction and discharging of abrasive materials Properties: Re...
Read more

CAREX® Segmentblock system for sealing transfer chutes This easy-to-operate sealing system is for sealing the sides and head of the transfer chute opposite the conveyor-belt. Backing plates ar...
Read more

DUSTEX® Water dispersion system for industrial dust suppression. Dust-filled air that occurs when crushing or transporting bulk goods, can be cleaned by spraying with fine water droplets. Ordinary...
Read more

VIBREX® Conveyor-belt scraper for keeping conveyor-belt systems clean. These are the ideal elements for belt cleaning. Individuall spring-mounted, wear-resistant scrapers are pressed flexibly agai...
Read more

VIBMATIC® The VSR procedure for stress reduction This process is the fastest and most cost-effective alternative for low-tension annealing in welded, smelted and casting constructions. After a pro...
Read more

LINEX® Conveyor-belt centralizing idler for the directional stability of conveyor-belts These universally-applicable supporting rollers guarantee the safe directional stability of conveyor-belts. ...
Read more

VSR BLASTER® Air cannons and air injectors for pneumatic removal of blockages and deposit build-up in silos. Air cannons are fixed to the outside of the silos. They blast the stored compressed ai...
Read more

ROTOSTAR® discharge screw from Agrichema is designed to unload flat bottom silos by means of a rotating screw revolving 360 deg. around a central pivot point in the silo base. More than 1200 ROTOSTAR...
Read more

MODUFLEX-loading bellow loads bulk material in a dust free and non polluting manner into silo vehicles, platform trucks, railway wagons and ships. The pioneering module technology of MODUFLEX guarante...
Read more

SHOCK-BLOWER® air-blast units from AGRICHEMA store highly compressed air ( or inert gases ) up to 10 bars and expel this within milliseconds into the dividing plane between the bulk material and the ...
Read more

VIBOSTAR® bin activators from Agrichema are used to discharge bulk material on continual basis out of silos. The advantage of this bin activator is the easy to install mode, complete emptying, low en...
Read more

Material: Polyester-Polyurethane, Colour: clear Single Length: 10 and 15 m Temperature Resistance: -40 °C up to +100 °C Applications: Suction and transport ob abrasive materials e.g. sand, gravel...
Read more

SMB Logistics - Storage Systems Palette-storage-systems On smallest area the biggest area-exploitation: This is the concept of the compact-storage-system. This concept is also valid for the storing ...
Read more

The MBA 200 combines past and present advantages The new turnable and detachable head of the instrument is a very comfortable feature of the modern MBA 200. It can be adjusted to the local requireme...
Read more

The Batchmixer* provides the ultimate in speed and flexibility, reducing overall process time compared to traditional systems, enabling the operator to mix powders with different characteristics in a ...
Read more

The DCS – Drum Containment System* is a stainless steel cylindrical glove box with glass cover and with two glove ports. Highly economical in comparison with conventional isolation systems, the DCS ...
Read more

Plant iT ... is the implementation of our extensive process automation know-how. All of our experience gathered over almost 20 years in various sectors has flowed into our modular software syste...
Read more

Our B 80 Standmixer has one motor for the rotation plate and one drive for the mixing unit. The mixing container is fixed and/or centered on the rotation plate. The rotation plate is suitable to take ...
Read more

Our B 200 Drum mixer is suitable for mixing 200 litres standard drums. The mixing unit consists of a basic housing with epicyclic gear, which is powered by a motor of 0,25 KW over a chain. The mixer e...
Read more

Our B 53 compact mixer is equipped with 2 driving motors - a rotation plate engine, which moves the mixing container around on ist own axle, and a mixing unit, which propels the mixing tools. The mix...
Read more

Our panmixers with the beba-four-arms mixing system assures an intensive mixing process within a short time. The mixer arms are exactly adjusted to the drum wall to guarantee a perfect and intensive m...
Read more

Our tube chain conveyors fulfill a large variety of tasks and transport all different kinds of bulk material. The focus is not only on high efficiency, but also on energy-efficient continuous operatio...
Read more

Controlled and consistent lubrication - temperature independent Similar to perma STAR VARIO, the perma STAR CONTROL delivers precise amounts of lubricant and its operation is temperature independent...
Read more

Three different sizes for a broad range of applications perma STAR VARIO is fully automatic, temperature independent and very precise. The user can select the discharge period (1,3,6 or 12 month) and ...
Read more

For high corrosion, high humidity and high contamination environments perma FUTURA is the ideal automatic lubrication system for areas that require hygiene or for harsh operating conditions which may ...
Read more

Durable, simple, reliable . perma CLASSIC can be used for all applications with ambient temperatures of 0 to +40 °C. The reliable operating principle is based on an electrochemical reaction. The lubr...
Read more

Impact scales are flow meters for free flowing bulk materials. The weight is recorded while the material runs through the weighing system. In order to achieve a high measuring accuracy with an imp...
Read more

The ESW 2 built-in belt scale enlarges our product range of belt scales. It is suited for conveyers with low or medium conveying capacity with an excellent price-performance ratio. Despite a very s...
Read more

The Brabender FlexWall Plus Feeder is a universal, super compact screw-type metering feeder for virtually all kinds of bulk ingredients even with poorest flowability, featuring a trapezoid design and ...
Read more

Bin activators "BAV" from Brabender Technologie are vibratory discharge bottoms for silos and bins and are indispensable wherever difficult to handle bulk materials have to be discharged. Particularly...
Read more

Brabender bulk bag unloaders "BagMaster" for lined or unlined bulk bags feature a unique discharge mechanism consisting of a horizontal massage ring with a front opening and massage rods around its ci...
Read more

Metering feeders from Brabender Technologie are gravimetric and volumetric dosing feeders for high-accuracy metering of bulk ingredients with good to critical flow characteristics. The metering feeder...
Read more

Loss-in-weight feeders from Brabender Technologie are high-tech gravimetric metering feeders for bulk ingredients with good to critical flow characteristics. The product line offers solutions for virt...
Read more

Read more

Permanently magnetic grid magnets can be supplied in circular, rectangular or square format and are therefore universally applicable. Ferrous particles are filtered out from bulk material as they pass...
Read more

The SAFEMAG inline magnet was developed specifically for applications in the plastics industry. It is designed for inspecting different granulates up to a grain size of 6-8 mm at a temperature of up t...
Read more

GF 4000 metal separation systems remove magnetic and non-magnetic metal impurities (steel, stainless steel, aluminium etc) from pneumatically conveyed bulk materials such as granulate, powder and flou...
Read more

The RAPID VARIO-FS metal separator is used to inspect bulk goods under free-fall conditions. It detects all magnetic and nonmagnetic metal contaminations (steel, stainless steel, aluminium) – even w...
Read more

RAPID 5000 metal separation systems remove magnetic and non-magnetic metal impurities (steel, stainless steel, aluminium etc) from free-falling bulk materials by means of a reject flap ("Quick Flap Sy...
Read more

Limitless possibilities. Our challenge. KURZ special silos meet the most varied requirements. The silos are planned and built individually to your requirements. PRESSURE-SHOCK RESISTANT SILOS *...
Read more

Large projects. Highly individual. Where size matters, we frequently use site-welded silos. In this way, the volume can be maximised and, at the same time, transport and handling costs minimised. The...
Read more

Keenly priced. Compact know-how. Concentrated silo competence in a small space. You can save a large amount of freight costs with silos segmented for export. Each of our silo units consists of a few ...
Read more

Cost-effective. And quickly installed. Bolted silos are mainly used to store large quantities of various bulk materials, in particular gravel, hardcore, chippings and non-metallic minerals. The silos...
Read more

Clean solutions. Completely safe. With their safety concept, the KURZ pressure-shock resistant coal dust silos meet all requirements and ensure smooth operation. We will accompany you reliably and co...
Read more

Dec’s Big Bag Emptying Stations are modular. This ensures that they are easily adapted to product characteristics, and the appropriate docking systems can be selected, whether the material is non- p...
Read more

The MPTS Micro Powder Transfer System* facilitates complex sampling procedures directly from equipment, such as dryers, mixers, packaging units, etc.
Read more

The PFL Powderflex* provides continuous and precise dosing and conveying of small to medium quantities of powder, whether the requirement is for the controlled charging of powders into continuous prod...
Read more

The PTS Powder Transfer System is an exceptionally effective and reliable method of transferring and dispensing both dry and wet powders and granules. Its unique filtration concept with a flat membran...
Read more

Robuschi is pleased to introduce the new solution for BIOGAS applications, especially developed for the conveying and compression of biogas, as well as natural and landfill gases in waste water treatm...
Read more

The RVS pumps are suitable to compress gas and vapours in the process of sterilization, concentration, drying, impregnation, plastic extrusion, degassing and extraction of non-condensable gas from con...
Read more

Venti Oelde extraction, filter and conveying systems are used in almost all industries. They capture dust and solid particles from air and process gases, convey them and separate them. Our product...
Read more

ROBOX SCREW combines unique characteristics of the "oil-free" RSW screw compressor with the consolidated characteristics of ROBOX compact units.
Read more

3 lobe rotary blower, vacuum operation, equipped with a ROBUSCHI patented atmospheric air injection cooling system
Read more

Compact low pressure compression unit with RBS lobe blower
Read more

Low pressure 3 lobe rotary blower with patented system LOW PULSE, to eliminate pressure and delivery pulsation.
Read more

DISAB offers a broad varity of hoses, pipes, nozzles and all kind of equipment for efficient vacuum cleaning
Read more

Suction units are a combination of vacuum unit and filterseparator. Suction units are mainly build as mobile or semi mobile units for flexible vacuum cleaning
Read more

Fitlerseparators remove the dust out of the air stream
Read more

Vacuum units are used to create vacuum and air stream for cleaning
Read more

AC vacuum unit - concentrated power for all applications - Strong, corrosion proof, GRP body - Oversize filter, long service times - Compact dimensions L 850 x W 520 x H 870 mm - Easy to handle...
Read more

High rise. With a lot of volume. Filler silos: these consist of two silos which are designed to sit one above the other. They are mainly used in asphalt mixing plants and are used to store different ...
Read more

Weather protection. Also insulated and heated. Whether you want to protect your discharge and control equipment or whether you only want to prevent unauthorised access, we offer our standard silos al...
Read more

A double bargain: save time and money. Our mobile silos are the right choice wherever speed and flexibility are required. Due to their PLUG & PRODUCE characteristic, KURZ mobile silos can be used imm...
Read more

Factory-Welded Standard Silos Skirted Silos Mobile Silos Filler Silos Standard Silos Segmented for Export Bolted Silos Coal Dust Silos Site-Welded Silos Special Silos Electrical control systems...
Read more

Standardised, but flexible nonetheless. In almost all areas of manufacturing, factory-welded standard silos are used. We offer these silos with diameters of 2,400 mm to 4,200 mm and volumes from 10 m...
Read more

Read more

Read more

Read more

Read more

Read more

- Tumbler Screening Machines - Vibrating Screening Machines - Laboratory Screening Machines
Read more

Production of shaftless screw spiral conveyors for conveying loose materials (stainless steel, steel) - Production of BIG-BAG stations - Production of steel storage tanks (stainless steel, steel) - Te...
Read more

pipe systems, bends
Read more

Dahlman, your specialist for equipment and filterspares for liquid, gas, dust and air filtration.
Read more

Bulk conveying here horizontal - vertikal - horizontal
Read more

The Dahlman Key Supply Concept (DKC) Dahlman supports the demand of industrial companies to contract out the purchase and stock holding to selected suppliers. This tendency is an aspect of the pheno...
Read more

The Iris Diaphragm Valve is designed specifically to control the flow of dry bulk solids. The Diaphragm closes completely - creating a diaphragm visually resembling the iris of a camera. None of the p...
Read more

The Webac vibrator motors features a high degree of efficiency coupled with a small profile yet extremely robust cross section. Webac vibrator motors are produced with the most modern production techn...
Read more

Read more

Read more

Read more

Read more

Read more

Read more

Read more

Read more

Read more

Read more

Read more

Read more

Read more

Read more

Read more

Impact absorption station, with telescopic spindle for adjustment of the number of degrees for absorption of the impact force
Read more

Read more

The Liquid Solid Separator™ is Russell Finex's advanced version of traditional liquid separators. This multi purpose machine has the ability to deal with soft and fibrous oversized solids and is ada...
Read more

This revolutionary separator is designed for accurate grading or sizing of wet and dry materials up to five fractions in one operation. It benefits from major advances in sieving technology providing ...
Read more

Russell Finex in-line filters for both industrial and sanitary applications offer an effective solution to your filtration requirements. Our Self-Cleaning Russell Eco Filters® improve your product qu...
Read more