EXHIBITOR LIST

Our Exhibitors

Rotech Laboratories Ltd

Rotech Laboratories Ltd

L52

WS10 7BG Wednesbury
United Kingdom
www.rotechlabs.co.uk

Rotech Laboratories Limited is a UKAS accredited metallurgical test laboratory offering a large range of testing services to many sectors of industry.
Rotech is proud of its comprehensive product knowledge and the ability to provide technical support to all its customers.
Major test work includes...
-Failure analysis* and manufacturing investigations - using optical and electron microscopy and x-ray analysis.
-Microstructural evaluation to examine aspects such as weld quality, effectiveness of heat treatment, case depth, grain size, coating thickness etc.
-Positive Material Identification Service (PMI)
-Product finish testing utilising a fully equipped coating testing laboratory for the evaluation of painted, phosphated and electroplated finishes by salt spray, humidity, thickness, adhesion tests etc.
-Chemical analysis of ferrous and non-ferrous metals and alloys using ICP-OES and Leco C+S and nitrogen determination.
-Mechanical testing including tensiles at ambient and elevated temperatures, impacts at ambient and sub-zero temperatures, hardness and bend testing, and a full range of tests on fasteners and welds.
-Weld testing harnessing considerable experience of destructive weld testing for weld procedures and welder qualifications to EN ISO, ASME IX and major customer specifications.
(*test not covered under our UKAS accreditation)

Products

Product news

  • Rotech to extend laboratory facility with new Cleanliness testing laboratory

    Rotech is extending its laboratory facility and is in the final stages of installing a Cleanliness testing laboratory at its Wednesbury site. This is due to launch in October 2017, and will specialise in verifying component cleanliness after manufacturing processes. Qualitative and quantitative detection of particulate contamination is essential in preventing costly field failures.

    The Cleanliness Laboratory will primarily be for Automotive and Aerospace customers. This will allow Rotech to increase its testing capacity with a designated laboratory offering optimal reduction of risk of contamination. It will also provide a fully contained verification process in applications where reliability is crucial and safety paramount.

    https://www.rotechlabs.co.uk/our-new-lims-laborato...

  • Rotech Introduction

    Rotech Laboratories Limited is a UKAS accredited metallurgical test laboratory and provides an extensive schedule of accredited tests, offering a large range of testing services to many sectors of industry.
    Rotech is proud of its comprehensive product knowledge and the ability to provide technical support to all its customers. Rotech Laboratories has successfully developed a unique position within laboratory testing, providing immediate, friendly, personal and professional advice from extensive experience.
    We believe in sitting down with customers and discussing issues using, as far as possible, non-technical jargon, which can sometimes frustrate customers.
    Major test work includes...
    • Failure analysis* and manufacturing investigations - using optical and electron microscopy and x-ray analysis.
    • Microstructural evaluation to examine aspects such as weld quality, effectiveness of heat treatment, case depth, grain size, coating thickness etc.
    • Product finish testing utilising a fully equipped coating testing laboratory for the evaluation of painted, phosphated and electroplated finishes by salt spray, humidity, thickness, adhesion tests etc.
    • Chemical analysis of ferrous and non-ferrous metals and alloys using ICP-OES and Leco C+S and nitrogen determination.
    • Mechanical testing including tensiles at ambient and elevated temperatures, impacts at ambient and sub-zero temperatures, hardness and bend testing, and a full range of tests on fasteners and welds.
    • Weld testing harnessing considerable experience of destructive weld testing for weld procedures
    and welder qualifications to EN ISO, ASME IX and major customer specifications.
    *The activities identified with * are not UKAS accredited.

    Manufacturing Areas Covered…

    • Architectural Ironmongery • Automotive and other transport sectors
    • Communications and Electronics • Composites-project managing testing including C-Scan • Construction • Consumer Products • Energy and Power-Turbine and renewable generation • Fluid handling • Forgings & Machined Components • Foundry & Castings including secondary smelting • General Engineering • Heavy and Yellow Goods • Marine • Metal Finishing • Metal Packaging • Metal Recycling • Motorsport • Office Equipment • Oil and Gas • Petrochemical • Pressings & Fabrications • Rail • Security & Defence • Stockholding & Processing • Trading Standards & the Legal profession • Welding and Fabrication • White Goods

    http://www.rotechlabs.co.uk/

  • Rotech Laboratories Video

    Welcome to Rotech Labs...
    Rotech Laboratories Limited provides an extensive schedule of accredited tests and offers a large range of testing services to many sectors of industry. Rotech is proud of its comprehensive product knowledge and the ability to provide technical support to all its customers. Rotech Laboratories has successfully developed a unique position within the laboratory testing scene providing immediate, friendly, personal and professional advice from extensive experience.
    Major test work includes...
    Failure analysis* and manufacturing investigations - using optical and electron microscopy and x-ray analysis.
    Microstructural evaluation to examine aspects such as weld quality, effectiveness of heat treatment, case depth, grain size, coating thickness etc.
    Product finish testing utilising a fully equipped coating testing laboratory for the evaluation of painted, phosphated and electroplated finishes by salt spray, humidity, thickness, adhesion tests etc.
    Chemical analysis of ferrous and non-ferrous metals and alloys using ICP-OES and Leco C+S and nitrogen determination.
    Mechanical testing including tensiles at ambient and elevated temperatures, impacts at ambient and sub-zero temperatures, hardness and bend testing, and a full range of tests on fasteners and welds.
    Weld testing harnessing considerable experience of destructive weld testing for weld procedures
    and welder qualifications to EN ISO, ASME IX and major customer specifications.
    (*not UKAS accredited)

    http://www.rotechlabs.co.uk