EXHIBITOR LIST

Our Exhibitors

ELESA (UK) LTD

ELESA (UK) LTD

A16

LN4 3HX Metheringham
United Kingdom
https://www.elesa.com/en/elesab2bstoreuk

Elesa (UK) Ltd is a branch office of the Elesa Spa group, international manufacturer of plastic and metal standard machine parts for the mechanical engineering industry for over 75 years. Elesa products express a quality of design and ergonomic research with recognition of its brands as guarantees of quality and reliability. Continuous attention to clients’ needs and a rapid service have made Elesa a reference point for designers and builders. More than 40,000 product codes, 180 patents and 38 international design awards produced with systems certified to ISO 9001 and ISO1401 are supported by localised stock and technical support.

Elesa Standards cover industrial components including, handwheels, handles, levers, knobs, spring and indexing plungers, levelling feet, locks and latches and hydraulic tank accessories in engineering grade plastics, aluminium, steel and stainless steel. Also a range of light to heavy duty industrial castors, vibration damping elements, conveyor components, rod ends, fork joints and magnets.

Industrial machinery and equipment are well served with the Elesa anti-vibration mounts, ball lock pins, ball transfer units, filler breathers, grip knobs, latch clamps and metal hinges, in addition to oil level indicators, plastic hinges, pneumatic clamps, stainless steel hinges, toggle clamps, tubular handles and wing knobs.

Products

Product news

  • Elesa at the Advanced Engineering Exhibition, NEC, 1st – 2nd November, Stand No: A16

    Much of the extensive Elesa range of standard machine elements are designed around the needs of the UK’s advanced engineering industries through the 5 sectors of Aerospace, Composites, Automotive, Performance Metals and Connected Manufacturing. Elesa meets the needs of these industries for R&D, design, test, production and procurement across the UK’s OEM’s and top tier corporations. The Advanced Engineering Exhibition takes place on 1st and 2nd November at the NEC, Birmingham

    Featured on the Elesa stand no. A16 (located in the Automotive Zone) will be their IP65-7 direct dial digital position indicators which include new generation electronics for easy installation and readout. Their IP67 CFSW safety switch and hinge unit is also on display to demonstrate how it can facilitate safe operation of protective panels and doors of control equipment.

    These are joined by the Elesa wireless spindle positioning system which facilitates faster and more reliable machine set up by using a wireless connected profile controller. This unit then displays initial set up values for each of up to 36 electronic position indicators. Initiation of a program then simply involves choosing the appropriate menu which will quickly re-set each spindle to its correct start position so that the machine is “good to go”. This process saves a great deal of time and takes out much of the possibility of human error.

    A wide range of Elesa levelling feet complement the needs of equipment manufacturers. Many of these are available in stainless steel for heavy duty application and to special designs for example those incorporating vibration damping pads to prolong equipment life, or others for use in bio-hazard areas such as food processing and other hygiene/wash down areas.

    This is exemplified by the Elesa LMHD hygienic levelling feet which have mounting holes for rugged adjustable equipment mounting and a design which reduces cleaning work. Since cleaning can be as much as 25% of the production time this leaves more time available for production. There is also less use of resources such as fresh water, energy and cleaning agents, leading to lower total costs.

    https://www.elesa.com/en/elesab2bstoreuk

  • Elesa Direct Drive IP65/7 Electronic Position Indicator for 20mm shafts

    The DD52R-E from Elesa fits larger 20mm dia. shafts while offering IP65 or IP67 sealing for arduous environments on industrial equipment of all kinds where high accuracy measurement of shaft position is required. This enables machine setting, counting or position monitoring to be achieved while providing an excellent easy to read six digit display that is legible in any position, with an 8 year battery life.

    The flexibility of electronic menu setup allows the DD52R-E to be customised for orientation, absolute or incremental read-out, in metric or imperial – or for angular display in degrees, while of course being re-programmable at any time to suit a new application or new process.

    The high degree of dust and water protection at IP65 or IP67 means that the unit is suitable for applications that require frequent wash-down, even with high power water jets, e.g. in food, pharmaceutical or similar environments.

    https://www.elesa.com/en/elesab2bstoreuk/Position-...

  • Cost-reduced Q series levelling feet from Elesa

    Elesa have announced their AISI 304 stainless steel levelling elements series LSQ.A-SST, LVQ.A-SST and LVQ.F-SST which extend their range at an even better price/performance point.

    These levelling feet adopt the SMQ-SST threaded stems with adjusting square rather than the hexagon of the SM stems. The SMQ-SST stems use less material by use of ingenious machining from round stainless steel rod in place of the previous machined down hex bar.

    The range includes a ground fixing foot design, a no-slip foot with friction pad insert and a standard technopolymer foot – all using the new stem which offers as much as a 30% cost saving achieved by more efficient use of raw materials. Sizes run from 32mm to 100mm dia., dependent on style of foot selected.

    https://www.elesa.com/SearchDisplay?categoryId=215...

  • IP67 Safety Switch and Hinge from Elesa

    Combining multiple functions has many advantages for installers and operators so that the Elesa CFSW-110 IP67 180° hinge has been designed with its own built-in multiple safety switch, in order that in the event of accidental opening of a control cabinet door, machine panel or safety door, it automatically shuts off the power and protects the operators of machinery and production equipment. The CFSW is paired with its equivalent mechanical hinge, the CFMW-110 which facilitates a tough, safe installation.

    The CFSW is double insulated and approved by IMQ CA02.04800 in compliance with EN 60947-1/2007 + EN 60947-5-1:2004 + A1/2009. Low voltage control auxiliaries. Approved by UL: E360222.l. It is available with different combinations of contacts with positive opening (2NO+2NC, 1NO+3NC etc). These robust units are tested to a B10d value of 2,000,000, are totally tamper-proof, and may be quickly and easily installed.

    Standard connections are 8 pole connector or 8 core cable in 2m or 5m lengths. 180 degree opening is normal but other operating angles may be specified. The Elesa website provides extensive user guidance for installation, configuration and operation. Similar products in the Elesa range include metal hinges, standard plastic hinges, stainless steel hinges, tubular handles and wing knobs.

    https://www.elesa.com/en/elesab2bstoreuk/Hinges-an...

  • Levelling feet with ground fixing from Elesa

    Sometimes it is important to secure levelling feet to the floor – to stop them “walking” with the movement of the equipment or machine – so maintaining alignment in production or transfer lines for example.

    The LMR.F levelling elements from Elesa offer just this facility. They are available in sizes from 50mm up to 100mm – manufactured in zinc plated steel or AISI 304/303 stainless steel and fitted with a non-slip NBR rubber soled foot, which may additionally be fixed with an axially mounted screw via a side extension tab. This arrangement resists rotation and so stablilises the equipment.

    https://www.elesa.com/en/elesab2bstoreuk/levelling...

  • Versatile IP65/67 Direct Drive Electronic Position Indicator from Elesa

    Elesa’s IP65/67 DD51-E electronic position indicator offers all the usability and accuracy of its forerunners plus added versatility and convenience in a single compact specification. The DD51-E is a battery powered direct drive unit which can be used on machine shafts in any position to provide a reading of the absolute or incremental positioning of a machine component. It is therefore suited to machines with rotating shafts such as roll handling e.g. refinishing, paper, card and other packaging production, printing and incremental feed equipment, where accurate rotation indexing is essential.

    The DD51-E incorporates a 5 year life lithium battery and may be programmed to display linear measurements in metric or imperial - or angular measurement in degrees and to allow choice of reading after one revolution of the shaft, in addition the display orientation is user selectable to suit equipment layout. This versatility obviates the need to specify exact ratios, units and display parameters at the time of ordering. It of course also allows subsequent re-programming if the indicator is reallocated to new equipment or incorporated in a different process.

    https://www.elesa.com/en/elesab2bstoreuk/Position-...

  • Vibration Damping Elements from Elesa – for health & safety, machine longevity and equipment accuracy

    LW.A vibration damping units from Elesa feature natural rubber damping pads built into an adjustable levelling foot design. They have been designed to damp vibrations, shocks and noise from moving components or non-balanced masses such as rotating machines. This vibration can cause significant detrimental effects on operator health as well as malfunctioning/reduction-in-lifespan of the machine or adjacent equipment.

    “Active” machine isolation is described as being for vibration producing equipment such as presses, machine tools, transfer equipment etc., as well as “passive” isolation which is considered as for equipment that might be adversely affected by external vibration, such as quality testing, measuring or performance assessment equipment. This “bi-directional” isolation is an important feature of the LW.A levelling elements and is often a feature in the same location.

    Sizes of the LW.A damping elements range from 80mm dia. up to 200m dia. with maximum static load capacity of 40,000 N. Documentation is available that gives full technical guidance on correct selection to ensure the damping/isolation level required dependent upon frequency of vibration, static load and amplitude/ deflection of the equipment.

    https://www.elesa.com/en/elesab2bstoreuk/Levelling...

  • Levellers for Bio-Hazard Equipment

    The LMRS. levelling feet from Elesa are manufactured in stainless steel (AISI 303/304) and designed to shed liquids downward. They are consequently excellent for levelling of equipment used in food processing, abattoirs and other hygiene sensitive applications.

    The low sulphur content of materials used in the LMRS and design features such as convex base with sleeved bolt are particularly significant to the food industry. An adjustable sleeve covers the threaded stem, and other sharp edges and corners have been to a large extent avoided, thus increasing the efficiency of power cleaning measures in messy environments.

    The base itself incorporates a vulcanised NBR rubber (perbunan) non-slip disc in a large area pad to spread weight and aid stability. LMRS levelling feet come in sizes from 60mm dia. to 100mm dia. with load carrying capacities of 21000N to 27000N. M16 to M24 studs are available.

    https://www.elesa.com/en/elesab2bstoreuk/levelling...

  • Wireless spindle positioning system from Elesa speeds accurate machine set up

    The Elesa wireless spindle positioning system enables faster and more reliable machine set up by use of a wireless connected profile controller, which displays the initial set up values on each of up to 36 electronic position indicators. The operator can simply choose the appropriate menu then quickly re-set each spindle to its correct start position and the machine is “good to go”. This saves time and takes out much of the possibility of human error.

    Elesa DD52R-E-RF position indicators are networked to the UC-RF control unit by radio connection thus enabling an easy and quick installation. Current and target positions are transmitted by RF to and from the control unit, facilitating rapid machine set up.

    The system consequently saves time during the format alignment process. Once the set up profile has been called up by the PLC, the control unit UC-RF transmits the target position to each DD52R-E-RF position indicator. The current/target position is displayed on the LCD of the DD52R-E-RF. The operator manually sets the position of the spindles following the arrow displayed on the LCD (clockwise/counter-clockwise rotation). Once all the spindles are correctly set, the UC-RF control unit communicates to the PLC of the machine that the setup has been completed - the system prevents the start of the machine until the set-up has been completed, for safety reasons and to prevent loss of production from incorrect settings.

    The UC-RF controller can network with up to 36 position indicators and is compatible with PLC Interfaces: RS232, RS485, Ethernet/IP, Profibus and Modbus. The DD52R-E-RF (IP67) position indicator 6 digit display mode can be selected by the operator.

    https://www.elesa.com/en/elesab2bstoreuk

  • Elesa LMHD levelling feet – meeting hygiene standards, cleaning quickly and efficiently

    The Elesa LMHD hygienic levelling feet with mounting holes provide rugged adjustable equipment mounting and facilitate reduced cleaning work – which can be up to 25% of the production time. Thus leaving more time available for production, with less use of resources such as fresh water, energy and cleaning agents, also with less waste water to process, and so lower total costs.

    LMHD series feet are certified according to EHEDG guidelines and are therefore ideal for use in hygienic applications including not only where food is produced but in many other industrial areas, such as the pharmaceutical industry and in the manufacture of paints and dyes.

    The LMHD levelling feet are designed with a bottom seal which protects the area beneath the foot plate from dirt and a sealing ring above the adjustment sleeve which enables fastening without creating a dead space. They also have a mobile foot joint with a wiping action ball seal and a high quality finish which prevents adherence of dirt and facilitates cleaning.

    The Elesa LMHD levelling feet are part of a special series of standard components that meet the requirements of the EHEDG and the 3-A Sanitary Standards manufactured with FDA and EU compliant plastics and elastomers. Their special seal design ensures reliable protection for static and adjustable parts.

    https://www.elesa.com/en/elesab2bstoreuk